Are you looking for IP55 Testing and Certification Electrical Panel?

Are you looking for IP55 Testing and Certification Electrical Panel?

If you are an Electrical Panel Manufacturer and looking for IP55 Testing and Certification for your Electrical Panel, then you are at the right place, we can provide you IP Testing and Certification service. We have BIS, NABL, and Tec Approved Laboratory; we can do testing as per your Requirements.

How to Get IP55 Testing and Certification for Electrical Panel?  

Here is the process of Getting IP55 Testing and Certification for Electrical Panel. We can do Electrical Panel IP55 Testing as per IEC EN 60529 Standard

Two types of IP55 Testing:

1. IP55 Dust proof Testing and
2. IP55 Rainproof/waterproof Testing

Test method for IP55 Dust proof Testing:

Electrical Panel tested in a dust chamber, in which talcum powder is maintained in suspension by an air current. The chamber shall contain 2 kg of powder for every cubic meter of its volume. The talcum powder used shall be able to pass through a square-meshed sieve whose nominal wire diameter is 50 u m and whose nominal free distance between wires is 75 u m. It shall not have been used for more than 10 tests.

Test method for IP55 RainProof/Waterproof Testing:

• Test for second characteristic numeral 5 with the 6,3mm nozzle.
• The test is made by spraying the enclosure from all practicable direction with a stream of water from a standard the nozzle as show in Figure 6.

The conditions to be observed are as follows: -

• The internal diameter of the nozzle 6,3mm
• Delivery rate: 12,51/min±5%
• Water pressure: to be adjusted to achieve the specified delivery rated
• Core of the substantial stream circle of approximately 40mm diameter at 2,5m distance from nozzle
• Test duration per square meter of enclosure surface area likely to be sprayed: 1 min
• Minimum test duration 3minuts
• Distance from nozzle to enclosure surface between 2,5m and 3m.

What is the charge of IP55 Testing for Electrical Panel?

·         Charges depend on product dimensions, Costing  Start from 10000 to 1lakh

What are the duration or Time periods of IP55 Testing for Electrical Panel?

·         You will get a test report within a week

What is the Test Equipment’s used for IP 55?

1. The instrument used for IP Dustproof Testing: Sand and dust test chamber
2. The instrument used for IP Waterproof /Rainproof Testing: Rain test chamber

If you want to Purchase/Buy IP55 Testing equipment, Please feel free to contact us

We have a testing facility of IP55 Testing and Certification to provide you an official quotation please share Product's details like (dimensions + photo).

We are Providing Testing and Certification service all over India, Mumbai, Kolkata, Delhi, Chennai, Bangalore, Hyderabad, Pune, Ahmedabad, Surat, Visakhapatnam, Chandigarh, Ludhiana, Noida UP - 201304,

If you have any Requirements for testing (IP rating, IK rating) on the product Please feel free to contact us.
Mr. Puneet Sharma
+91-8196980555 - 07986633030 

Contact on Whatsapp https://wa.link/86ucwa
Email: ITCIndiaOne@Gmail.Com

https://lm-79-testing.blogspot.com/ https://electricalsafetytestinglab.wordpress.com/

 

People Searches Related:

• IP Testing for Electrical Panel
• IP55 Validation Test Report
• ip55 Testing charge
• ip55 Testing duretion
• ip55 waterproof meaning
• ip55 rating table
• ip55 rating chart
• ip55 testing equipment
• Ingress Protection Test IP55
• IP5x
• IPx5
• IEC EN 60529
• ip55 testing procedure
• ip55 testing standards