Wednesday 30 December 2015

Photovoltaic (PV) Modules Testing

Photovoltatc (PV) Modules Testing  Laboratory in India. ITC India can do Electrical Safety testing against Photovoltaic (PV) Modules equipment for following types of products/standards: (Photovoltaic modules, Sun cubes, etc.) Popular standards for Photovoltaic (PV) Modules Product testing are IEC 61215 & IEC 62108

General Safety Testing for Luminaries:

  • Visual Inspection
  • Insulation Test
  • Thermal Cycling
  • Humidity Freeze
  • Damp Heat
  • Wet Leakage Current Test
If you have any query regarding Lm-79 Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Wednesday 23 December 2015

Cable Gland Testing in India

ITC India Providing Cable Gland Testing Service in India. ITC can do Electrical Safety testing against Cable Gland Testing for following types of products/standards:
BS 6121: Specification for mechanical cable glands for elastomer and plastics insulated cables, IEC 62444: Cable glands for electrical, BS EN 50262: Cable glands for electrical installations Test carries out under this standard. installations
Cable retention testCable anchorage testCable anchorage twist testImpact test
Torque testIngress protection (IP) testElectrical continuity testInsulation resistance test and more…

If you have any query regarding Cable Gland Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Saturday 19 December 2015

Environmental Testing Services

ITC India Nabl Accredited laboratory Providing Environmental Testing Services in India.
Electrical Safety testing against Environmental Testing equipment against following types of products/standards:
Types of Tests
Applicable Standards
Dry heat test
IS 9000 pt (III); IS 9000(part- 3) ; IS 1248 ; IS 13779 ; IEC 60068-2-2
Dry Cold test
IS 9000 pt- (II) ; IS 1248 ; IS 13779 ; IEC 60068-2-1
Damp heat test (Steady state)
IS 9000 pt (IV); IS 13779 ; IS 1534; IEC 60068-2-78
Damp heat test (Cyclic)
IS 9000 Pt(V); IEC 60068-2-30
Damp heat test (Composite)
IS 9001-4
Composite temperature/Humidity Cyclic test
IEC 60068-2-38
Temperature cycling/change of temperature
IS 9000 Pt (XIV); IEC 60068-2-14
Impact test
(IK01, IK02, IK03, IK04, Ik05, IK06, IK07, IK08, IK09, IK10)
IEC 62262 ; IEC 60068-2-75 ; IEC 62208; IEC 62275; IS 8828 ; IS/IEC 60898-2 ;
IEC 60898-1 ; IS 12640 (Part 1) / IEC 61008-1 ; IS 12640 (Part 2) / IEC 61009-1 ;
IEC 61008-2-1 ; IEC 61009-2-1 ; IEC 61330
Dust test Ingress of protections (Degrees)
(IP 1X, 2X, 3X, 4X, 5X, 6X
IP X3, X4, X5, X6, X7, X8)
IS 9000 Pt (XII); IS/IEC 605

If you have any query regarding Environmental Testing Services and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Friday 18 December 2015

Photometric Testing

ITC India Nabl Accredited laboratory Providing Photometric Testing service in India

  • Major tests facility:
  • Marking Durability
  • Accessibility Test
  • Protection against Electric Shocks
  • Power I/P & Current
  • Heating/ Temperature Rise
  • Leakage Current
  • Di-Electric strength
  • Transient Impulse overvoltages
  • Moisture Resistance
  • Leakage current and Electric strength
  • Endurance
  • Abnormal Operation
  • Stability & Mechanical Hazards
  • Mechanical strength
  • Ingress Protection
  • Provision for Earthing
  • Creepage & Clearance
  • Resistance to heat and fire
  • Resistance to rusting
  • Creepage distances and air clearances
  • Instability hazards
If you have any query regarding Photometric Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Thursday 17 December 2015

IP Testing

ITC India Providing IP Testing service in India. IP Testing labs in India : IP Testing As Per IEC 60529 ITC can do Electrical Safety testing against IP Testing for following types of products/standards:
We have developed a special testing facility against Solid particle protection & Liquid ingress protection generally called as the IP testing. We have below test facility at present in our;
1. IP 1X, IP 2X, IP 3X, IP 4X for protection of machine against Penetration by solid foreign objects
2. IP 5X for Dust Protection
3. IP 6X for Dust Protection
4. IP X3, IP X4, IP X5, IP X6, IP X7 & IP X8 for protection against ingress of water.

OVERVIEW OF COMMONLY SOUGHT IP CODES
1X    protection against objects >50mm    X1    protection against vertically Dripping water
2X    protection against objects >12.5mm    X2    dripping water at -15° from vertical
3X    protection against objects >2.5mm    X3    protection against spraying water
4X    protection against objects >1mm    X4    protection aginst splashing water
5X    Dust Protected ( limited ingress)    X5    protection aginst low pressure jetting water
6X    Dust tight protection    X6    protection against high pressure jetting water
IP(Ingress Protection) Testing
Ingress protection (IP) testing at ITC India NABL accredited Electrical Safety Testing laboratory can determine a products susceptibility to solid particle (including dust) ingress and liquid ingress (water).

Protection of the tests specified in : the following standard :-
1. IEC 60529
2. BS EN 60529
This classification system utilize the “IP” (“Ingress Protection”) normally followed by two digits:
1. Ingress Protection of (IP) Ratings (Solid ingress)
2. Ingress Protection (IP) Ratings (Liquid ingress)
Purpose:
The testing will access the protection of the equipment against ingress of solid bodies and/or liquids, varying over differing degrees of protection, depending upon the requirements you place on your product.
Protection against solid/dust entry:
The test specified in the first digit of the Protection Index (IP1X, IP2X, IP3X, IP4X, IP5X, IP6X), meaning protection against solid particles and dust entry into the fixture according to the BS EN 60598-1 IEC 60598 – 1, IEC 60529.
1. IP1X Protection against solid object greater than 50mm diameter2. IP2X Protection against solid objects diameter exceeding than 12.5 mm
3. IP3X Protected against solid objects exceeding  than 2.5 mm diameter
4. IP4X Protected against solid objects exceeding than 1.0 mm diameter
5. IP5X Dust Protected
6. IP5X Dust tight (with a vacuum applied to the product)
Protection Index Against Water entry:

1. IPX1 Protected against dripping water
2. IPX2 Protection against dripping water at tilted to 15 degrees
3. IPX3 Protected against spraying water
4. IPX4 Protected against splashing water
5. IPX5 Protected against water jets

6. IPX6 Protected against powerful water jets
7. IPX7 Temporary immersion in the waterh position to prevent satisfactory operation of the item or to present a safety risk 8. IPX8

IP Testing service in India, Mumbai, Chennai, pune, Ahmedabad, Ludhiana, Ambala, Chandigarh, Panchkula, Mohali, New Delhi

If you have any query regarding IP Testing, Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Wednesday 16 December 2015

LM-79 Testing Service in India

ITC India  NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification.

Our Lab is fully equipped with high accuracy measuring testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335–1, IEC 60601, IEC 61010, IEC 60204, IEC 60598, IEC 60950, IEC 61427, BS EN 50262, etc…..

The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL.ITC INDIA performing ELECTRICAL SAFETY TESTING for the following:
EMC/EMI Testing Machinery Testing Luminaries and Lightning Testing Electro Medical Equipments Testing Laboratory Equipment Testing Household Appliances Testing IT and Telecom Equipment Testing Environmental Testing Battery Testing. LM 79

If you have any query regarding LM 79 Testing, Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Tuesday 15 December 2015

Electrical Safety Testing Service

ITC India Providing Electrical Safety Testing Service in India. Owing to the rich industrial experience and expertise in this domain, we are instrumental in providing Electrical Testing Service. This Electrical Testing Service is known for its high reliability and excellent rates.

ITC India NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification.

Our Lab is fully equipped with high accuracy measuring testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335--1, IEC 60601, IEC 61010, IEC 60204, IEC 60598, IEC 60950, IEC 61427, BS EN 50262, etc.....

The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL.ITC INDIA performing ELECTRICAL SAFETY TESTING for the following:   EMC/EMI Testing Machinery Testing Luminaries and Lightning Testing Electro Medical Equipments Testing Laboratory Equipment Testing Household Appliances Testing IT and Telecom Equipment Testing Environmental Testing Battery Testing. LM 79 testing.
If you have any query regarding Electrical Safety Testing
Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Monday 14 December 2015

LM-79 Testing Ahmedabad

LM-79 Testing Service Ahmedabad

We can do the testing of your LED product against the different standard like LM 79, IS 16106, IEC 60598-1, IEC 61347-2-13, IEC 62384, IEC62722-2-1, IEC 62031, IS 15885(part2/sec13), IS 16103, IS 16102, IEC 62612, and IEC 60969 etc

If you have any query regarding Lm-79 Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Friday 11 December 2015

Electro Medical Equipment Testing India

ITC India NABL Accredited laboratory provide Electrical Safety testing against Electro Medical equipments for following types of products/standards: Popular standards for Electro Medical Product testing are IEC 60601-1, IS 13450 etc

General Safety Testing for Electro Medical:
  • Power Input
  • Marking & Instruction
  • External and internal wiring
  • Resistance to environmental Stress
  • Instability hazards
  • Creepage and Clearances distances
  • Determination of Accessible Parts
  • Protective earthing, functional earthing and potential equalization of ME EQUIPMENT
  • Leakage currents and patient auxiliary currents
For List of standards under 60601
List of Major standards under Electro Medical
List of Major standards under Electro Medical
Medical Electrical Equipment – Part 1 : General Requirements For Safety 2 : Collateral Standard : Electromagnetic Compatibility – Requirements And TestsIEC 60601-1-2
Medical Electrical Equipment – Part 2-5: Particular Requirements For The Basic Safety And Essential Performance Of Ultrasonic Physiotherapy EquipmentIEC 60601-2-5
Medical electrical equipment – part 2: particular requirements for the safety of electrically operated hospital bedsIEC 60601-2-38
Medical electrical equipment – part 2-21: particular requirements for the basic safety and essential performance of infant radiant warmersIEC 60601-2-21
Medical Electrical Equipment – Part 1 : General Requirements For Safety 2 : Collateral Standard : Electromagnetic Compatibility – Requirements And TestsIEC 60601-1-2
Electro Medical Equipment Testing service in Mumbai, Ahmedabad, Pune, Chennai , Delhi, Panchkula, Ludhiana, Ambala
If you have any query regarding Electro Medical Equipment Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Laboratory Measuring Instruments Testing service

Laboratory Measuring Instruments Testing service
 
ITC India NABL Accredited laboratory provide Electrical Safety testing against Laboratory and Measuring Instruments equipment's for following types of products and standards:
Popular standards for Laboratory and Measuring Instrument Product testing are As per IEC 61010. Electrical control equipment, Electrical microscopes, Power supply, Auto transformer, Electrical laboratory equipment, Signal generators, Transducers, Transmitters Popular standards for Laboratory & Measuring Product testing are IEC 61010.

General Safety Testing for Luminaries:
  •  Testing in Single Fault condition
  • Marking & Documentation
  • Protection against electric c shock
  • Determination of Accessible parts
  • Protective Bonding
  • Creepage and Clearances distances
  • Drop Test
  • Protection By Interlocks
Laboratory Measuring Instruments Testing service in Mumbai, Ahmedabad, Pune, Chennai , Delhi, Panchkula, Ludhiana, Ambala

If you have any query regarding Laboratory Measuring Instruments Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Tuesday 8 December 2015

Lm-79 Testing Chennai, India

ITC India Electrical Safety Testing Laboratory serve LM-79 Testing Service in Chennai, India. LM-79 Testing  is a Conduct of photometric test for LED luminaires. ITCindia document that the photometric laboratory must follow to test LED luminaires. Mostly it tells you how the luminaire must be tested and what instruction must be included in the photometric report.
A photometric report according to LM-79 Test will involve the luminaires photometric data
  • Lumens
  • Vertical distribution of the lumens
  • Color temperature  & electric data
  • Power, current.

LM-79 Testing  is an approved method for testing electrical and photometric analysis of solid state LED lighting products. LM-79 Test involve procedures for operating reproducible analysis of:
  • LEDs properties
  • Including: total flux
  • Electrical power
  • Efficacy and chromaticity
If you have any query regarding Lm-79 Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Electrical Testing Service

Owing to the rich industrial experience and expertise in this domain, we are instrumental in providing Electrical Testing Service. This Electrical Testing Service is known for its high reliability and excellent rates.

We are NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification.

Our Lab is fully equipped with high accuracy measuring  testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335--1, IEC 60601, IEC 61010, IEC 60204, IEC  60598, IEC 60950, IEC 61427, BS EN 50262, etc.
The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL. ITC India performing Electrical Safety Testing for the following:
  1. EMC/EMI Testing      
  2. Machinery Safety Testing             
  3. Luminaries and Lightning Testing      
  4. Electro Medical Equipments Testing      
  5. Laboratory Equipment Testing      
  6. Household Appliances Testing      
  7. IT and Telecom Equipment Testing      
  8. Environmental Testing      
  9. Battery Testing
  10. LM 79 Testing

Laboratory & Measuring Instruments Testing:`

ITC can do Electrical Safety testing against Laboratory & Measuring Instruments equipments for following types of products/standards:
Popular standards for Laboratory & Measuring Instrument Product testing are IEC 61010.
Electrical control equipment, Electrical microscopes, Power supply, Auto transformer, Electrical laboratory equipment, Signal generators, Transducers, Transmitters
Popular standards for Laboratory & Measuring Product testing are IEC 61010.
General Safety Testing for Luminaries
Testing in Single Fault condition
 Marking & Documentation
Protection against electric c shock
Determination of Accessible parts
Protective Bonding
Creepage and Clearances distances
Drop Test
Protection By Interlocks


Electro Medical Equipment Testing

Electro Medical Equipments Testing:
ITC can do Electrical Safety testing against Electro Medical equipments for following types of products/standards:
Popular standards for Electro Medical Product testing are IEC 60601-1, IS 13450 etc
General Safety Testing for Electro Medical
  Power Input
  Marking & Instruction
  External and internal wiring
  Resistance to environmental Stress
  Instability hazards
  Creepage and Clearances distances
  Determination of Accessible Parts
  Protective earthing, functional earthing and potential equalization of ME EQUIPMENT
  Leakage currents and patient auxiliary currents
For List of standards under 60601

List of Major standards under Electro Medical
Medical Electrical Equipment – Part 1 : General Requirements For Safety 2 : Collateral Standard : Electromagnetic Compatibility – Requirements And Tests
IEC 60601-1-2

Medical Electrical Equipment – Part 2-5: Particular Requirements For The Basic Safety And Essential Performance Of Ultrasonic Physiotherapy Equipment
IEC 60601-2-5

Medical electrical equipment – part 2: particular requirements for the safety of electrically operated hospital beds
IEC 60601-2-38

Medical electrical equipment – part 2-21: particular requirements for the basic safety and essential performance of infant radiant warmers
IEC 60601-2-21

Medical Electrical Equipment – Part 1 : General Requirements For Safety 2 : Collateral Standard : Electromagnetic Compatibility – Requirements And Tests
IEC 60601-1-2

LM79 Testing Service

We can do the testing of your LED product against the different standard like LM 79, IS 16106, IEC 60598-1, IEC 61347-2-13, IEC 62384, IEC62722-2-1, IEC 62031, IS 15885(part2/sec13), IS 16103, IS 16102, IEC 62612, and IEC 60969 etc
Pay Mode Terms: D/P (Documents Against Payment), T/T (Bank Transfer), Other


Electrical Safety Testing Service

Owing to the rich industrial experience and expertise in this domain, we are instrumental in providing Electrical Testing Service. This Electrical Testing Service is known for its high reliability and excellent rates.
we are NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification.
Our Lab is fully equipped with high accuracy measuring testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335--1, IEC 60601, IEC 61010, IEC 60204, IEC 60598, IEC 60950, IEC 61427, BS EN 50262, etc.....
The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL.ITC INDIA performing ELECTRICAL SAFETY TESTING for the following:
· EMC/EMI Testing Machinery Testing Luminaries and Lightning Testing Electro Medical Equipments Testing Laboratory Equipment Testing Household Appliances Testing IT and Telecom Equipment Testing Environmental Testing Battery Testing. LM 79


LM79 Testing in India


wing to the rich industrial experience and expertise in this domain, we are instrumental in providing Electrical Testing Service. This Electrical Testing Service is known for its high reliability and excellent rates.
we are NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification.
Our Lab is fully equipped with high accuracy measuring testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335--1, IEC 60601, IEC 61010, IEC 60204, IEC 60598, IEC 60950, IEC 61427, BS EN 50262, etc.....
The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL.ITC INDIA performing ELECTRICAL SAFETY TESTING for the following:
· EMC/EMI Testing Machinery Testing Luminaries and Lightning Testing Electro Medical Equipments Testing Laboratory Equipment Testing Household Appliances Testing IT and Telecom Equipment Testing Environmental Testing Battery Testing. LM 79


IP Testing


IP Testing labs in India : IP Testing As Per IEC 60529 ITC can do Electrical Safety testing against IP Testing for following types of products/standards:
We have developed a special testing facility against Solid particle protection & Liquid ingress protection generally called as the IP testing. We have below test facility at present in our;
1. IP 1X, IP 2X, IP 3X, IP 4X for protection of machine against Penetration by solid foreign objects
2. IP 5X for Dust Protection
3. IP 6X for Dust Protection
4. IP X3, IP X4, IP X5, IP X6, IP X7 & IP X8 for protection against ingress of water.

OVERVIEW OF COMMONLY SOUGHT IP CODES
1X    protection against objects >50mm    X1    protection against vertically Dripping water
2X    protection against objects >12.5mm    X2    dripping water at -15° from vertical
3X    protection against objects >2.5mm    X3    protection against spraying water
4X    protection against objects >1mm    X4    protection aginst splashing water
5X    Dust Protected ( limited ingress)    X5    protection aginst low pressure jetting water
6X    Dust tight protection    X6    protection against high pressure jetting water
IP(Ingress Protection) Testing
Ingress protection (IP) testing at ITC India NABL accredited Electrical Safety Testing laboratory can determine a products susceptibility to solid particle (including dust) ingress and liquid ingress (water).

Protection of the tests specified in : the following standard :-
1. IEC 60529
2. BS EN 60529
This classification system utilize the “IP” (“Ingress Protection”) normally followed by two digits:
1. Ingress Protection of (IP) Ratings (Solid ingress)
2. Ingress Protection (IP) Ratings (Liquid ingress)
Purpose:
The testing will access the protection of the equipment against ingress of solid bodies and/or liquids, varying over differing degrees of protection, depending upon the requirements you place on your product.
Protection against solid/dust entry:
The test specified in the first digit of the Protection Index (IP1X, IP2X, IP3X, IP4X, IP5X, IP6X), meaning protection against solid particles and dust entry into the fixture according to the BS EN 60598-1 IEC 60598 – 1, IEC 60529.
1. IP1X Protection against solid object greater than 50mm diameter2. IP2X Protection against solid objects diameter exceeding than 12.5 mm
3. IP3X Protected against solid objects exceeding  than 2.5 mm diameter
4. IP4X Protected against solid objects exceeding than 1.0 mm diameter
5. IP5X Dust Protected
6. IP5X Dust tight (with a vacuum applied to the product)
Protection Index Against Water entry:

1. IPX1 Protected against dripping water
2. IPX2 Protection against dripping water at tilted to 15 degrees
3. IPX3 Protected against spraying water
4. IPX4 Protected against splashing water
5. IPX5 Protected against water jets

6. IPX6 Protected against powerful water jets
7. IPX7 Temporary immersion in the waterh position to prevent satisfactory operation of the item or to present a safety risk 8. IPX8


Photometric Testing

Major tests facility:
Marking Durability
Accessibility Test
Protection against Electric Shocks
Power I/P & Current
Heating/ Temperature Rise
Leakage Current
Di-Electric strength
Transient Impulse overvoltages
Moisture Resistance
Leakage current and Electric strength
Endurance
Abnormal Operation
Stability & Mechanical Hazards
Mechanical strength
Ingress Protection
Provision for Earthing
Creepage & Clearance
Resistance to heat and fire
Resistance to rusting
Creepage distances and air clearances
Instability hazards


Product - Electrical Testing Service


Testing Services (Core Areas):
ITC can do Electrical Safety testing against below international standard like:
 IEC 61010-1 : Lab Instruments
 IEC 60204-1 : Control Panel
 IEC 60595 : LED luminary
 IEC 61347 : Lamp control gear
 IEC 60950 : Information technology equipments
 IEC 60601 : Electromedical equipments
 IEC 60065 : Audio video & similar product
 IEC 61439 : Low voltage switchgear & control gear assemblies
 IEC 60034 : rotating electrical machine and more contact us for more information…
Major Area    Generic Standards
Solar    IEC/EN 61215
Luminaries    IEC/EN 60598/IS 10322
Information Technology equipment    IEC/EN 60950/IS 13252
EMC/EMI    IEC/EN 61000/IS 14700
Photometry    LM79/IS 16106
Machinery    IEC/EN 60204
Battery    JIS 8702-1/IS 13369, IEC 61427, IEC 60896, IS 5054, IS 15549
Electro Medical    IEC/EN 60601/IS 13450-1
Household equipments    IEC/EN 60335/IS 302
Laboratory equipments    IEC/EN 61010
Environmental testing    IEC/EN 60068/IS 9000
Cable glands    BS EN 6121/EN 50262/IEC 62444
Ingress Protection    IEC 60529
Audio/Video Appliance    IEC 60065

Environmental Testing Services

Environmental Testing Services:
ITC can do Electrical Safety testing against Environmental Testing equipment against following types of products/standards:
Types of Tests
Applicable Standards
Dry heat test
IS 9000 pt (III); IS 9000(part- 3) ; IS 1248 ; IS 13779 ; IEC 60068-2-2
Dry Cold test
IS 9000 pt- (II) ; IS 1248 ; IS 13779 ; IEC 60068-2-1
Damp heat test (Steady state)
IS 9000 pt (IV); IS 13779 ; IS 1534; IEC 60068-2-78
Damp heat test (Cyclic)
IS 9000 Pt(V); IEC 60068-2-30
Damp heat test (Composite)
IS 9001-4
Composite temperature/Humidity Cyclic test
IEC 60068-2-38
Temperature cycling/change of temperature
IS 9000 Pt (XIV); IEC 60068-2-14
Impact test
(IK01, IK02, IK03, IK04, Ik05, IK06, IK07, IK08, IK09, IK10)
IEC 62262 ; IEC 60068-2-75 ; IEC 62208; IEC 62275; IS 8828 ; IS/IEC 60898-2 ;
IEC 60898-1 ; IS 12640 (Part 1) / IEC 61008-1 ; IS 12640 (Part 2) / IEC 61009-1 ;
IEC 61008-2-1 ; IEC 61009-2-1 ; IEC 61330
Dust test Ingress of protections (Degrees)
(IP 1X, 2X, 3X, 4X, 5X, 6X
IP X3, X4, X5, X6, X7, X8)
IS 9000 Pt (XII); IS/IEC 605



Battery Testing



ITC can do Electrical Safety testing against Battery Testing for following types of products/standards:
As per IS 1651
As per IEC: 60896-11
a. Verification of Constructional Requirement
a. Capacity test
b. Marking & Packing


Cable Gland Testing


ITC can do Electrical Safety testing against Cable Gland Testing for following types of products/standards:
BS 6121: Specification for mechanical cable glands for elastomer and plastics insulated cables, IEC 62444: Cable glands for electrical, BS EN 50262: Cable glands for electrical installations Test carries out under this standard. installations
Cable retention test
Cable anchorage test
Cable anchorage twist test
Impact test
Torque test
Ingress protection (IP) test
Electrical continuity test
Insulation resistance test and more…

Photovoltatc (PV) Modules Testing

ITC can do Electrical Safety testing against Photovoltaic (PV) Modules equipment for following types of products/standards:
(Photovoltaic modules, Sun cubes, etc.)
Popular standards for Photovoltaic (PV) Modules Product testing are IEC 61215 & IEC 62108
General Safety Testing for Luminaries
Visual Inspection
Insulation Test
Thermal Cycling
Humidity Freeze
Damp Heat
Wet Leakage Current Test


Consumer Household Commercial Appliance Equipment Testing


ITC can do Electrical Safety testing against Consumer, Household, and Commercial Appliance Equipment equipment for following types of products/standards:
Electric Iron, Warming plates, Electric Kitchen Machines, Refrigerators, Room Heaters, Electric Immersion, Water Heater, Electric Stoves, Vacuum Cleaners and Water-Suction Cleaning Appliances
Popular standards for Consumer, Household & Commercial Appliance Equipment Product testing are IEC 60335-1:2010-05, IS:302-1: 2008, IS 302-2-12: 1993, IS 302-2-14: 1994, IS 302-2-24: 1994, IS 302-2-30: 2007, IS 302-2-201:2008, IS 302-2-202:1992, EN 60335-1:2010, IS 4250:1980, IEC/EN 60335-2-2, IEC/EN 60335-2-3, IEC/EN 60335-2-12, IEC/EN 60335-2-14, IEC/EN 60335-2-30, IEC/EN 60335-2-89 etc
General Safety Testing for Luminaries
Classification
Marking & Instruction
Power I/P & Current
Leakage Current and electric strength at operating temp
Stability & Mechanical Hazards
Internal Wiringg
Creepage & Clearance
Resistance to heat and fire
Temperature withstand test for bowl


Information Technology Testing IT Equipment Testing


ITC can do Electrical Safety testing against Information Technology Instruments equipments for following types of products/standards:
Popular standards for Information Technology Product testing are IEC 60950.
(Monitor , SMPS, Network card ,UPS, Computer, Modem ,Cable tester , Balance, Refrigerated enclosure)
Popular standards for Information Technology Product testing are IEC 60950
General Safety Testing for Luminaries
List of critical components
Electrical data
Durability
Access to energized parts
Limited power source measurement
Protection against hazardous moving parts
Stability
Drop Test
Touch current and protective conductor current
Impulse test


LM79 Electrical Testing Service


Item Code: ITC-05
As the development of LED technology continues to grow and diversify, the need for consistent and standardized testing procedures for LED has become more prevalent than ever. Light Laboratory is an NIST NVLAP Accredited testing for

ITC India has made strides to stay current with the new testing standard LM-79 set forth by the IESNA (Illuminating Engineering Society of North America). In addition, "IN-SITU" testing is now a priority when testing our LED light systems for more reliable results. Fixtures tested by LM-79 standards will now feature a Lighting Facts label provided through the program created by the U.S. Department of Energy.

As the development of LED technology continues to grow and diversify, the need for consistent and standardized testing procedures for LED has become more prevalent than ever. ITC INDIA is an NABL Accredited testing for LM-79 IEC/EN 60598.
Light Laboratory has made strides to stay current with the new testing standard LM-79 set forth by the IEC/EN 60598. In addition, ITC INDIA testing is now a priority when testing our LED light systems for more reliable results. Fixtures tested by LM-79 standards will now feature a Lighting Facts label provided through the program created by the IEC/EN.

LM-79 Electrical and Photometric Measurements of Solid-State Lighting Products
Approved method describing procedures and precautions in performing reproducible measurements of LEDs:
Total luminous flux
Electrical powers
Luminous Intensity distribution
Efficacy (lm/watt)
Chromaticity
LM-79 Scope

Applies to LED-based products incorporating control electronics and heat sinks, that is, those devices that require only AC mains power or a DC voltage power supply to operate.

Absolute Photometry Basis

LM-79 requires complete luminaire testing
Traditionally, photometric evaluation of lighting products is based on separate tests for lamps and luminaires
For SSL products, LED lamps typically cannot be separated from their luminaire because of heat effects

Relative vs. Absolute Photometry

Relative testing – Lamps of interest and luminaire are measured separately. Then the actual light distribution and intensity of the complete luminaire of interest is derived by normalization of the test data
Absolute testing – The actual light distribution and intensity of the luminaire of interest is measured directly from the complete luminaire.
LM 79 Testing in MumbaiLM 79 Testing in AhmedabadLM 79 Testing in PuneLM 79 Testing in BangaloreLM 79 Testing in ChennaiLM 79 Testing in New DelhiLM 79 Testing in LudhianaLM 79 Testing in Ambala
Minimum Order Quantity: 1 Piece
Delivery Time: 10 days
Packaging Details: 17k

Wednesday 2 December 2015

Tissue Embedding Station and Cooling Plate Testing As per IEC 61010-1:2010, IEC 61326-1:2012

Tissue Embedding Station & Cooling Plate Testing As per IEC 61010-1:2010, IEC 61326-1:2012


ITC India Electrical Safety NABL Accredited Laboratory Providing Testing As per IEC 61010-1:2010, IEC 61326-1:2012 For Tissue Embedding Station & Cooling Plate

If you have any query regarding Tissue Embedding Station and Cooling Plate Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Friday 27 November 2015

Microtome Knife Sharpener Testing As per IEC 61010-1:2010, IEC 61326-1:2012

Microtome Knife Sharpener Testing As per IEC 61010-12010, IEC 61326-12012

ITC India Electrical Safety NABL Accredited Laboratory can Do Microtome Knife Sharpener Testing As per IEC 61010-1:2010, IEC 61326-1:2012

This part of IEC 61010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used.a) Electrical test and measurement equipment

If you have any query regarding Tissue Processor Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Thursday 19 November 2015

Tissue Processor Testing As Per IEC 61010-1, IEC 61326

Tissue Processor Testing As Per IEC 61010-1,  IEC 61326

ITC India Providing Electrical Safety Testing and Certification for Tissue Processor As Per IEC 61010-1,  IEC 61326.

EN/IEC 61010-1 Testing:
Standard 61010-1 – Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use – Part 1: General Requirements

IEC/EN 61326 Testing:
IEC 61326 Testing in an EMC/EMI lab with five test chambers including two three-meter chambers and a staff with EN/IEC 61326 expertise.

If you have any query regarding Tissue Processor Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Monday 2 November 2015

Electrical Control Panel Testing As per EN 60204-1

Electrical Control Panel Testing As per EN 60204-1

ITC India Electrical Safety Testing NABL ISO 17025 Accredited Laboratory Can Do Electrical control panels Testing based on EN 60204 – 1: 2006

If you have any query regarding Electrical Control Panel Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Thursday 29 October 2015

LM 79 Testing For Street Light As Per IEC 60598-2-3

LM 79 Tesing For Street Light As Per IEC 60598-2-3

ITC India Nabl Accredited Electrical safety Testing Laboratory Can Do LM-79 Testing On Street Light As Per International standard IEC 60598-2-3

Test to be conducted under LM 79:
  • Measurement of Total Luminous Flux  & Luminous Efficacy
  • Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature & Color Rendering Index)
If you have any query regarding LM 79 Testing For Street Light and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Monday 26 October 2015

EMC /EMI Testing on Stage Box as per IEC 60950-1


EMC /EMI Testing on Stage Box as per IEC 60950-1 standard

ITC India Nabl Accredited Electrical Safety Testing Laboratory can do EMC /EMI Testing on Stage Box as per IEC 60950-1 standard

If you have any query regarding EMC /EMI Testing on Stage Box and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Thursday 15 October 2015

Street Light testing as per IEC 60598-2-3

Street Light testing as per IEC 60598-2-3
ITC India Nabl Accredited Electrical safety Testing Laboratory in India can do Street Light testing as per IEC 60598-2-3 standard

Particular requirements and Scope: – Luminaires for road and street lighting, This part of IEC 60598 specifies requirements for :
  • Luminaires for road, street lighting and other public outdoor lighting applications;
  • Tunnel lighting;
  • Column-integrated luminaires with a minimum total height above normal ground level of 2,5 m; and for use with electrical lighting sources on supply voltages not exceeding 1 000 V.
NOTE: Column integrated luminaires with a total height below 2,5 m are under consideration.
3.1.1 Normative references
The normative references listed in Section 0 of IEC 60598-1 apply to this part as well as the
following reference:
IEC 60364-7-714, 1996, Electrical installations of buildings – Part 7: Requirements for special
installations or locations – Section 714: External lighting installations
IEC 60068-3-76:1997, Environmental testing – Part 2-75: Tests – Test Eh: Hammer tests

If you have any query regarding Street Light testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Friday 9 October 2015

Suction Machine Testing As Per IEC/EN 60601-1

Suction Machine Testing As Per IEC/EN 60601-1, IEC /EN 13060, EN 285

ITC India NABL Accredited Electrical Safety testing Laboratory provide Suction Machine Testing As Per IEC/EN 60601-1, IEC /EN 13060, EN 285

If you have any query regarding Suction Machine Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Thursday 8 October 2015

Autoclave Testing As Per IEC/EN 60601-1

Autoclave Testing As Per IEC/EN 60601-1, IEC /EN 13060, EN 285

ITC India NABL Accredited Electrical Safety testing Laboratory provide Autoclave Testing As Per Per IEC/EN 60601-1, IEC /EN 13060, EN 285 Standard

If you have any query regarding Autoclave Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Monday 5 October 2015

Brass Lug, Brass Housing and Steel Screw Testing


Brass Lug, Brass Housing and Steel Screw Testing As per BS EN 60998-1:2004 standard
ITC India NABL Accredited Electrical Safety Testing Laboratory Can Do Brass Lug, Brass Housing and Steel Screw Testing As per BS EN 60998-1:2004 standard
  • Protection against electric shock Testing
  • Resistance to ageing Testing
  • Ip testing
  • Insulation resistance and electric strength Testing
  • Mechanical strength Testing
  • Temperature rise Testing
  • Resistance to heat Testing
  • Cree-page and clearances Testing
If you have any query regarding Brass Lug, Brass Housing and Steel Screw Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Thursday 1 October 2015

LM-79 testing on High Power LED Light Model


LM-79 testing on High Power LED Light Model

ITC India NABL ISO 17025 Accredited Electrical safety Testing Laboratory Can do LM-79 testing on High Power LED Light Model Testing as per standard
Test to be conducted under LM 79:
  1. Measurement of Total Luminous Flux & Luminous Efficacy
  2. Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature & Color Rendering Index)
  3. Light Intensity Distribution

If you have any query regarding LM-79 Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd
ITC India LM-79 testing on High Power LED Light Model
ITC India LM-79 testing on High Power LED Light Model  Blog

Friday 25 September 2015

LM-79 Testing on High bay LED lights

LM-79 Testing on High bay LED lights

  ITC India Nabl ISO 17025 Accredited Electrical safety Testing Laboratory Can do LM-79 Testing on High bay LED lights Testing as per standard

Test to be conducted under LM 79:
  1. Measurement of Total Luminous Flux & Luminous Efficacy
  2. Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature & Color Rendering Index)
  3. Light Intensity Distribution


If you have any query regarding LM-79 Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply.You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Tuesday 22 September 2015

IP 24 testing for Chest Cooler

IP 24 testing for Chest Cooler
ITC India NABL Accredited Electrical Safety Testing Laboratory in India. ITC India Can Do IP-24 Testing on Chest Cooler (320L, 405L) As Per IEC 60529.

If you have any query regarding IP 24 Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply.You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Monday 21 September 2015

IP 24 Testing for Visi Cooler 220L, 320L, 425L

IP 24 Testing for Visi Cooler 220L, 320L, 425L
ITC India NABL Accredited  Electrical Safety Testing Laboratory in India. ITC India Can Do IP-24 Testing on Visi Cooler 220L, 320L, 425L ( IP24 First Digit – SOLIDS Protected from touch by fingers and objects greater than 12 millimeters, Second Digit – LIQUIDS Protected from water spray from any direction)

If you have any query regarding IP 24 Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply.You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Tuesday 15 September 2015

Room Heater Leakage Current Test as per IS 302-2-30

Room Heater Leakage Current Test as per IS 302-2-30
ITC India Room Heater Testing Laboratory can Do Leakage Current Test as per IS 302-2-30 on Room Heater.
If you have any query regarding Battery Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply.You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Friday 11 September 2015

Battery Testing Laboratory

ITC India NABL Accredited Laboratory Provide Battery testing service As per IEC: 60896-11, IS 1651 in India

If you have any query regarding Battery Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply.You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Thursday 10 September 2015

Luminaries LED Product Testing

ITC INDIA NABL Accredited Laboratory Provide  Luminaries/LED Product Testing AS Per LM 79 ,IS 16106:2012 ,IEC 61347-2-13 ,IEC 62384,IEC62722-2-1,IEC 62031,IS 15885(part2/sec13),IS 16103,IS 16102,IEC 62612,IEC 60969 Standards
If you have any query regarding Luminaries/LED Product Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply.You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Wednesday 9 September 2015

LM-79 Testing for LED products

ITC INDIA provide testing against LM 79 - Approved Method for the Electrical and Photometric Testing of Solid-State Lighting Devices. Our lab is totally equipped with following high accuracy testing instruments to provide a total testing solution for LED based product

  • High Precision CCD Spectroradiometer
  • Digital Power Meter (RS-232 Model)
  • Digital CC and CV DC Power Supply
  • Integrating Sphere (Diameter=2.0M)
  • Standard Light Source (24V/50W)
  • LED Power Driver Tester
  • LM-79 Test report Contains:
  • Total luminous flux
  • Electrical power
  • Luminious Efficacy
  • Chromaticity
  • CCT, CRI

If you have any query regarding LM-79 Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply.You can call or write us for any clarification

Puneet Sharma | +91.8196980555 | itcindiaone@gmail.com | ITC India Pvt. Ltd

Tuesday 8 September 2015

Transformer Testing As per IEC 61558



ITC India NABL Accredited Transformer Testing Laboratory In India. ITC India Can Do Transformer Testing As per IEC/EN 61558 Standards.


If you are interested for Transformer Testing and Certification, you can send us you product technical specification with Images, so that we can provide testing facilities and price.
Puneet Sharma | 08196980555 | E-mail: Itcindiaone@gmail.com