Showing posts with label ISO 7175 Testing. Show all posts
Showing posts with label ISO 7175 Testing. Show all posts

Wednesday, 19 June 2019

ISO 7175 Testing Labs | ISO 7175 Testing Laboratories

ISO 7175 Testing Labs | ISO 7175 Testing Laboratories
ISO 7175 Testing Labs | ISO 7175 Testing Laboratories


Are You Looking for ISO 7175 Testing?

If you are looking for an ISO 7175 Testing Laboratory in India, ITC India Can Help You! ITC India one of the best ISO 7175 Testing Service Provider in India. ITCIndia Can do ISO 7175 Testing
On this blog, I am not just going to pitch you to hire us for our ISO 7175 Testing services but also going to provide a lot of valuable information on what, why and how we can do ISO 7175 Testing. Call on 0826440109108196980555 for ISO 7175 Testing laboratories.

Request for Impact Testing Report as per ISO 7175

ISO 7175 Testing ISO 7175 Testing[/caption]
Part 1 - Safety requirements of Children Cots and folding cots for domestic use 
Part 2: Test Methods of Children Cots and Folding cots for Domestic Use 
Internal Length between 900mm to 1400 mm
This standard applies to cots that are Fully assembled and are ready to use. It is possible that additional requirements be applied for cots that can be converted into other items (e.g. changing units, playpens).
This standard does not apply to carry cots, cribs, cradles, rocking and swinging cots
Clause 4 of ISO 7175 part 1 specifies the SAFETY REQUIREMENT apply both before and after testing as per ISO 7175 part 2

Safety Requirement as per ISO 7175 -1

S.NClause Test Requirement
14.2.1Material and surfaceMust meet the requirement of ISO 8124-3
24.2.2Flammability of textile coated textile and plastic coverings  The maximum rate of flame shall be 30 m/s in accordance with ISO 8124-2
34.3Initial stabilityThe cot should not overturn in accordance with ISO 7175-2 (Cl 6.2 )
44.4.1.1Edges and protruding partsEdges shall be round and free of burrs and sharp edges
54.4.1.2Self-tapping screwThis screw shall not be used to fasten components when dismantling the cot for transportation.
64.4.1.3Labels and decalsShould not be used on the internal surface of cot sides and ends
74.4.1.4Small partsIn accordance with ISO 7175-2
84.4.1.5Castor and WheelsShould not be fitted exception are there
94.4.2.2Assembly holesNo accessible hole between 7 mm dia and 12 mm dia unless depth is less than 10mm.
104.4.2.3Distance between cot base and sides and end s25 mm cone shall not pass between cot base and sides and between cot base and ends.
114.4.2.4Opening in mesh sides and ends7mm cone shall not pass through the mesh openings.
124.4.2.5Distance between slats of cot base60 mm cone should not pass between two adjacent slats of the cot base.
134.4.2.6Opening in the mesh of cot base85 mm cone shall not pass through a cot base made of mesh.
144.4.3Head Entrapment on the exterior of the cotIn accordance with ISO 7175 - 2
154.4.4Shear and squeeze pointsIn accordance with ISO 7175 - 2
164.4.5Snag pointsIn accordance with ISO 7175 - 2
174.4.6Locking SystemAll cots should be equipped with at least two locking system
184.4.7Cot baseIn accordance with ISO 7175 - 2
194.4.8Sides and endsIn accordance with ISO 7175 - 2
204.4.9Cot rimNo filing shall be removed from cot rim when testing as per 7175-2, 6.6 bite test
214.5Final StabilityThe cot should not overturn as per cl 6.12 of ISO 7175-2
224.6Mattress size  The distance between mattress and sides shall be less than 30mm
235PackagingThe plasting covering should be tested as per ISO 8124-1
246Instruction for useRead carefully and alphabet size >5mm
Part 2 Test Method: Children’s cot and folding cots for domestic use
ISO 7175 Testing 2
This standard is designed to prevent the child from climbing out. Does not apply to swing and rocking chair.
Test equipment
Test forces must be applied with a suitable object like cones, cones of dia 7mm, 25mm, 45mm, 60mm, 65mm and 85mm made of plastic or other hard materials are required for applying force.
Measurements/ Testing
1 . Before testing, Assemble and inspect the cot visually. Tight all the fittings. Determine whether exposed edges, screws, bolts, zips and other fittings are rounded off and do not have sharp edges.
  1. Measure the height of sides, holes and distance between slats of cot base, mesh width, side slats, clearance between cot base and sides and ends.
  2. Impact testing
  3. Stability tests
  4. Locking and location device
  5. Bend testing
  6. Fatigue testing
  7. Endurance testing
  8. Static loading testing
  9. Inspection
  10. Mechanical testing
 For more information please visit www.itcindia.org or write info@itcindia.org 

Why choose ITCIndia For ISO 7175 Testing?

ITCIndia is a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state of the art testing laboratories, assure a single source solution for meeting all applicable requirements, standards and voluntary schemes. And ITCIndia technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up to date knowledge of current and changing requirements.
Represented in over 5 locations in India, ITCIndia has an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The ITCIndia brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.
ITCIndia can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for ISO 7175  Testing – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

  1. Product Name, Technical Specifications, and Brochure
  2. Product Images
  3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward to working with you and get better together!

Mr Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form: