Wednesday 31 January 2018

Stationary Lead Acid Battery Testing Laboratory

Stationary Lead Acid Battery Testing Laboratory
Stationary Lead Acid Battery Testing Laboratory

Stationary Lead Acid Battery

IEC 60896-22 is applicable to  :-

  1. All stationary Lead-acid cells
  2. Monobloc batteries of the valve regulated type
  • For Float charge application: They can be permanently connected to a load and d.c. power supply.
  • In a static location: not generally moved from place to place.
They are incorporated into stationary equipment or installed in battery room.

These kinds of batteries can be used in

  • Telecom
  • UPS
  • Utility switch
  • Emergency power or similar applications
Objective of IEC 60896-22 :- It specify the methods of tests for all types and construction of valve regulated stationary Lead acid batteries and monobloc batteries.

Does not applicable :

  • lead-acid cells and monobloc batteries used for vehicle engine starting applications
  • solar photovoltaic energy systems
  • general purpose applications
There is a list of tests performed on the batteries for safe operation characteristics, durability Characterstics & performance Characteristics.

Safe operation characteristics

Test ClauseMeasurePurpose
6.1Gas emissionTo determine the emitted gas volume
6.2High Current ToleranceTo verify the adequacy of current conduction
cross- sections
6.3Short circuit current & d.c internal resistanceTo provide data for the sizing of fuses in the
exterior circuit
6.4Protection against internal ignition from external spark sourcesTo evaluate the adequacy of protective features
6.5Protection against ground short propensityTo evaluate the adequacy of design features
6.6Content and durability of required markingsTo evaluate the quality of the markings and the
content of the information
6.7Material identificationTo ensure the presence of material identification
markings
6.8Valve operationTo ensure the correct opening of safety valves
6.9Flammability rating of materialsTo verify the fire hazard class of battery materials
6.10Intercell connector performanceTo verify the maximum surface temperatures of
the connectors during high rate discharges

Performance characteristics

Test Clause Measurepurpose
6.11Discharge capacityTo verify the available capacities at selected
discharge rates or discharge durations.
6.12Charge retention during storageTo provide storage duration data
6.13Float service with daily dischargesTo determine cyclic performance under float charge conditions
6.14Recharge behaviorTo determine the recovery of capacity or
autonomy time after a power outage

Durability Characteristics

Test Clause Measurepurpose
6.15Service life at an operating temperature of
40 °C
To determine the operational life at elevated temperatures
6.16Impact of a stress temperature of 55 °C or
60 °C
To determine the influence of high stress
temperatures on cell or monobloc battery life
6.17Abusive over-dischargeTo determine the expected behaviour when excessive capacity is discharged
6.18Thermal runaway sensitivityTo determine the expected times to establish a condition of escalating current and temperature
6.19Low temperature sensitivityTo determine the sensitivity toward damage induced by electrolyte freezing
6.20Dimensional stability at elevated internal
pressure and temperature
To determine the propensity of the cell or
monobloc battery to be deformed by internal
pressure and at elevated temperature
6.21Stability against mechanical abuse of units
during installation
To determine the propensity of the cell or
monobloc battery to fracture or leak when
dropped.

If Your Buyers Demanding for Stationary Lead Acid Battery  Testing – Contact Now!

Kindly send us the following Details, So that we can provide you quotation for the same:

  1. Product Name, Technical Specifications and Brochure
  2. Product Images
  3. Total Number of samples Required: 2

Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form: