 |
| ISO 7175 Testing Labs | ISO 7175 Testing Laboratories |
Are You Looking for ISO 7175 Testing?
If you are looking for an ISO 7175 Testing Laboratory in India, We Can Help You! We are one of the best ISO 7175 Testing Service Providers in India. We Can do ISO 7175 TestingOn this blog, I am not just going to pitch you to hire us for our ISO 7175 Testing services but also going to provide a lot of valuable information on what, why, and how we can do ISO 7175 Testing. Call on 08196980555 for ISO 7175 Testing laboratories.
Request for Impact Testing Report as per ISO 7175
ISO 7175 Testing[/caption]Part 1 - Safety requirements of Children Cots and folding cots for domestic use
Part 2: Test Methods of Children Cots and Folding cots for Domestic Use
Internal Length between 900mm to 1400 mm
This standard applies to cots that are Fully assembled and are ready to use. It is possible that additional requirements be applied for cots that can be converted into other items (e.g. changing units, playpens).
This standard does not apply to carry cots, cribs, cradles, rocking and swinging cots
Clause 4 of ISO 7175 part 1 specifies the SAFETY REQUIREMENT apply both before and after testing as per ISO 7175 part 2
Safety Requirement as per ISO 7175 -1
| S.N | Clause | Test | Requirement |
| 1 | 4.2.1 | Material and surface | Must meet the requirement of ISO 8124-3 |
| 2 | 4.2.2 | Flammability of textile coated textile and plastic coverings | The maximum rate of flame shall be 30 m/s in accordance with ISO 8124-2 |
| 3 | 4.3 | Initial stability | The cot should not overturn in accordance with ISO 7175-2 (Cl 6.2 ) |
| 4 | 4.4.1.1 | Edges and protruding parts | Edges shall be round and free of burrs and sharp edges |
| 5 | 4.4.1.2 | Self-tapping screw | This screw shall not be used to fasten components when dismantling the cot for transportation. |
| 6 | 4.4.1.3 | Labels and decals | Should not be used on the internal surface of cot sides and ends |
| 7 | 4.4.1.4 | Small parts | In accordance with ISO 7175-2 |
| 8 | 4.4.1.5 | Castor and Wheels | Should not be fitted exception are there |
| 9 | 4.4.2.2 | Assembly holes | No accessible hole between 7 mm dia and 12 mm dia unless depth is less than 10mm. |
| 10 | 4.4.2.3 | Distance between cot base and sides and end s | 25 mm cone shall not pass between cot base and sides and between cot base and ends. |
| 11 | 4.4.2.4 | Opening in mesh sides and ends | 7mm cone shall not pass through the mesh openings. |
| 12 | 4.4.2.5 | Distance between slats of cot base | 60 mm cone should not pass between two adjacent slats of the cot base. |
| 13 | 4.4.2.6 | Opening in the mesh of cot base | 85 mm cone shall not pass through a cot base made of mesh. |
| 14 | 4.4.3 | Head Entrapment on the exterior of the cot | In accordance with ISO 7175 - 2 |
| 15 | 4.4.4 | Shear and squeeze points | In accordance with ISO 7175 - 2 |
| 16 | 4.4.5 | Snag points | In accordance with ISO 7175 - 2 |
| 17 | 4.4.6 | Locking System | All cots should be equipped with at least two locking system |
| 18 | 4.4.7 | Cot base | In accordance with ISO 7175 - 2 |
| 19 | 4.4.8 | Sides and ends | In accordance with ISO 7175 - 2 |
| 20 | 4.4.9 | Cot rim | No filing shall be removed from cot rim when testing as per 7175-2, 6.6 bite test |
| 21 | 4.5 | Final Stability | The cot should not overturn as per cl 6.12 of ISO 7175-2 |
| 22 | 4.6 | Mattress size | The distance between mattress and sides shall be less than 30mm |
| 23 | 5 | Packaging | The plastic covering should be tested as per ISO 8124-1 |
| 24 | 6 | Instruction for use | Read carefully and alphabet size >5mm |
Part 2 Test Method: Children’s cot and folding cots for domestic use
This standard is designed to prevent the child from climbing out. Does not apply to swing and rocking chair.
Test equipment
Test forces must be applied with a suitable object like cones, cones of dia 7mm, 25mm, 45mm, 60mm, 65mm, and 85mm made of plastic or other hard materials are required for applying force.
Measurements/ Testing
1 . Before testing, Assemble and inspect the cot visually. Tight all the fittings. Determine whether exposed edges, screws, bolts, zips, and other fittings are rounded off and do not have sharp edges.
- Measure the height of sides, holes, and distance between slats of cot base, mesh width, side slats, clearance between cot base and sides and ends.
- Impact testing
- Stability tests
- Locking and location device
- Bend testing
- Fatigue testing
- Endurance testing
- Static loading testing
- Inspection
- Mechanical testing
For more information please write ITCIndiaOne@gmail.com
Why Choose Us For ISO 7175 Testing?
We are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single-source solution for meeting all applicable requirements, standards, and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up-to-date knowledge of current and changing requirements.Represented in over 5 locations in India, We Have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.
We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance
If Your Buyers Demanding for ISO 7175 Testing – Contact Now!
Kindly send us the following Details, So that we can provide you with a quotation for the same:
- Product Name, Technical Specifications, and Brochure
- Product Images
- Total Number of Samples Required: 2
- Product Name, Technical Specifications, and Brochure
- Product Images
- Total Number of Samples Required: 2
