Tuesday, 19 July 2016

LM- 79 Testing Laboratory in Ahmedabad Gujarat India

LM 79 Testing at ITC India Pvt Ltd | LM 79 Testing laboratory in Ahmedabad Gujarat India

ITC India have NABL accreditation Testing laboratory under ELECTRICAL , ELECTRONICS and  PHOTOMETRY testing with certificate no. T-3509 , T-3570 & T-1811. ITC India Testing Laboratory is fully equipped with high accuracy Measuring Instruments and  trained personnel to provide testing and certification Services for Electrical and  Electronic equipments. ITC India Laboratory is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025. ITC India offering this LM 79 testing services in all over India like , Gujarat Ahmedabad, Mumbai, Pune, Delhi, New Delhi, Jaipur, Bangalore, Hyderabad, Chennai,  Kolkata, Surat
ITC India Pvt Ltd. has recently installed the  Goniophotometers LED/SSL at its Mohali laboratory. This is in addition to integrated sphere in the field of photometry testing of lamps & luminaires. With this additional testing facility, ITC India is able to perform complete photometry testing on all kinds of lamps and luminaires including LED lamps, LED Street Light, LED Downlights, outdoor lighting, LED floodlight, LED Tube lights, LED spotlight , led light strips,  led light bars, led light fixtures, and luminaires.
ITC India Laboratory  is totally equipped with high accuracy testing instruments  like spectrometer , integrating sphere , Goniophotometer , power meter , LED driver tester , safety tester , environmental chamber , and many more to provide a total testing solution for LED based product

IES LM-79-08 standard

Approved Method: Electrical and photometric Measurements of Solid-state Lighting Product
Photometric Results

Colorimetric Parameters:

  1. Chromaticity coordinates: (Chroma x / Chroma y / Chroma u(u’) / Chroma v / Chroma v’)
  2. Correlated Color Temperature (CCT)
  3. Duv Value
  4. Color Ratio
  5. Peak Wavelength (nm)
  6. Half Bandwidth (nm)
  7. Dominant Wavelength (nm)
  8. Color Purity
  9. Color Rendering Index (CRI – Ra)

Photometric Parameters:

  1. Total Luminous Flux (Lumens)
  2. Luminous Efficacy (Lumens/Watt)
  3. Radiant Power (Watts)

Electrical Results:

  1. Input Power (Watts)
  2. Input Voltage (Volts )
  3. Input Current (Amps)
  4. Power Factor
  5. Input Frequency (Hz)

Additional Parameters:

  1. Stabilization Time (Light and Power) = 60 minutes
  2. Test Geometry Configuration = 4π
  3. Spectroradiometer = (Lisun LMS-9000A Plus)
  4. Ambient Temperature = 25.0°C
ITC India Lab can do the testing of your LED product against the different standard like LM 79IS 16106IEC 60598-1IEC 61347-2-13IEC 62384IEC62722-2-1, IEC 62031IS 15885(part2/sec13)IS 16103IS 16102IEC 62612, and IEC 60969 etc  
LM 79 Testing for Solid State lighting; It includes below parameters like total lumens , CCT , CRI , Lm/watt , Luminous intensity distribution & electrical parameter like voltage , current , power & power factor ....

Popular Search about LM-79 Testing:-

  1. How to do LM-79 Testing?
  2. LM-79 Testing | LM-79 Test Approved Methods
  3. LM-79 Testing Report for LED lights, LM-79 Test Requirements & Procedure, lm 79 certificate
  4. LM-79 Testing for LED DownLight | LED Down Light Testing | LM 79 testing labs in India
  5. LED Luminaires Testing Services
  6. LM 79 testing for LED product
  7. LM-79 Testing Service in India

ITC India have around 5000 clients from LED lighting division from All over India. if you are interested to Get LM 79 Test Report.If you’re Buyers Demanding for LM-79 Testing – Contact Now!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations to fill out the Enquiry form

No comments:

Post a comment