A. Strand wire gauge
B. Standard wire gauge
C. Simple wire gauge
B. Standard wire gauge
C. Simple wire gauge
Monday, 27 February 2017
Monday, 13 February 2017
Q:- Which Motor is Used in Electric Traction?
A. Synchronous motor.
B. DC series motor.
C. Reluctance motor.
D. Induction motor.
B. DC series motor.
C. Reluctance motor.
D. Induction motor.
Sunday, 5 February 2017
Q:- Temporary magnets are used in which of the following?
1. Loud speakers.
2. Generators.
3. Motors.
4. All of these.
Hints :-
Permanent magnets lose their power after some days. So, if we use permanent magnet in those equipment, then it does not give efficient output. But, the above mentioned equipment's have to work efficiently at all time. That is why the temporary magnets (or) the electromagnets are used in the above mentioned machines.
Monday, 30 January 2017
Q:- In power transmission what is the follower?
1. Current follows voltage
2. Voltage follows current
2. Voltage follows current
Monday, 23 January 2017
Friday, 13 January 2017
Wednesday, 11 January 2017
Q:- The losses present in tr.line are?
1. Cu losses
2. Ohmic losses
3. Power losses
4. All the above
Monday, 2 January 2017
Tuesday, 4 October 2016
Photometry Testing Equipments
Photometry Testing Equipments
ITC India Pvt Ltd offers an extensive photometric testing service that is mentioned below. We provide the reports with NABL logo. As far as our scope, we cover all the solid state lightning luminaries. Our aim is to provide you with accurate, concise and relevant reliable information.
Now, the question arises, what the equipment's necessary for Photometric are testing. To measure colorimetric parameters, electrical parameters, photometric parameters, an integrating sphere is required. The function of an integrating sphere is to spatially integrate radiant flux. The design of an integrating sphere for any application involves a few basic parameters. These include selecting the optimum sphere diameter based upon the number and size of port openings and peripheral devices. Selecting the proper sphere coating considers spectral range, as well as performance requirements. When choosing a coating for an integrating sphere two factors must be taken into account: reflectance and durability. Integrating spheres collect the total flux emitted from a lamp, because an integrating sphere reflects and integrates all the light entering the sphere, the light received by a small area of the sphere is directly proportional to the total flux from a light source mounted within the sphere. The total flux from a test lamp is determined by comparing it to a calibrated working standard. The integrating sphere must include a lamp socket fixture, baffles, and a viewing port for the photo detector. In high accuracy measurements, an auxiliary lamp may be used to correct for lamp self absorption.
Integrating Sphere
For Light Intensity Distribution, a Goniophotometer is required. ITC owns a moving detector goniophotometer with class 1 accuracy. According to LM-79 clause 9.3.1, only two kind of type C goinophotometer can be accepted, moving detector goinophotometer and goniophotometer with moving mirror. It can measure all types of lightning sources, LED or HID luminaries such as indoor and outdoor luminaries, roadways luminaries, street lamps, flood lights and other kinds of luminaries.
Goniophotometer
It can measure
- Luminous intensity data
- Luminous intensity distribution
- Zonal luminous flux
- Luminaries Efficiency
- Coefficient of Utilization
- Luminance limitation curves
- Glare
- Maximum Ratio of distance to height
- Equal illuminance diagrams
- Isocandela diagrams
- Efficient luminescence angle
For any kind of query regarding LM 79 or photometry testing
If you’re Buyers Demanding for Photometry Testing– Contact Now!
ITC India has around 5000 clients from LED lighting division from All over India.
If you are interested to Get Photometry Test Report, You can Please feel free to Ask for Quotation.
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
Submit your requirement for Testing:-
Full Name
E-mail:
Describe Your Requirements with Technical Details:
Monday, 22 August 2016
LM-79 Testing
Electrical Safety Testing Lab ITC India: LED Lighting & LM-79 Luminaire Testing Laboratory ...: We, ITC India, are a leading testing company/laboratory having a NABL (Certificate No. T 1811) accreditation. The Laboratory is following ...
LM-79 Testing
If you are looking for LM-79 Testing service in your Area, you can feel free to contact us.
Puneet Sharma |M: +91.8196980555 |E-mail:- itcindiaone@gmail.com
Submit your requirement for Testing:-
Full NameLM-79 Testing
If you are looking for LM-79 Testing service in your Area, you can feel free to contact us.
Puneet Sharma |M: +91.8196980555 |E-mail:- itcindiaone@gmail.com
Submit your requirement for Testing:-
E-mail:
Describe Your Requirements with Technical Details:
Wednesday, 10 August 2016
IP testing as per IEC 60529 | Ingress Protection Laboratory
Ingress Protection Testing, IP testing as per IEC 60529, Ingress Protection Laboratory
ITC India NABL Accredited state of the art testing services for IP (Ingress Protection) Testing along with our technical expertise will ensure complete Client satisfaction.ITC India have marketing offices in Kolkata, Mumbai, Ahmedabad, Chennai, New Delhi, Chandigarh, Panchkula, Mohali, Bangalore, Hyderabad, Pune, Surat, Visakhapatnam, Indore, Bhubaneshwar, Coimbatore, Nagpur, Kochi, Mangalore, Vadodara, Jaipur, Kozhikode (Calicut), Noida, Gurgaon, Navi Mumbai, Lucknow, Patna
ITC India carry out (Ingress protection) IP testing as per the requirements of IEC 60529 for protection against solid foreign objects and/ liquids, depending on the requirements of the Client.
If you are looking for IP Testing laboratory in India, ITC India NABL Accredited Electrical Safety Testing Laboratory under ELECTRICAL, ELECTRONICS and PHOTOMETRY testing with certificate no. T-3509, T-3570 & T-1811. ITC India Laboratory is fully equipped with high accuracy Measuring Instruments and trained personnel to provide testing and certification Services for Electrical and Electronic equipments. ITC Lab is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025.
Degrees for protection for electrical enclosures
IEC:60529, IS:12063, IS:60947 (P-1) 2004
Luminaries is: 10322
Rotating machinery is: 4691, IEC:60034 -5
Environmental protection tests
ITC India have developed a special testing facility against Solid particle protection and Liquid ingress protection generally called as the IP testing. We have below test facility at present in our, We cover the range of protection types: IP XX as below:
1. IP 1X, IP 2X, IP 4X for protection of machine against Penetration by solid foreign objects
2. IP 5X for Dust Protection
3. IP 6X for Dust Protection
4. IP X7, IP X8, IP X5 & IP X6 for protection against ingress of water.
Dust chamber
Splash rain test
3 to 5mm of rain precipitation rate simulation equipment for ipx1 and ipx2 tests
Water spray tests
Top Searches related to ip testing:
If you’re Buyers Demanding for IP Testing– Contact Now!
ITC India has around 5000 clients from LED lighting division from All over India.
Get IP Test Report, You can Please feel free to Ask for Quotation.
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
Submit your requirement for Testing:-
Full NameE-mail:
Describe Your Requirements with Technical Details:
Friday, 5 August 2016
lm-79 Testing | lm 79 test report | lm 79 test procedure
LM-79 Testing, Lm 79 Test report, LM 79 Test procedure, India
ITC India is a NABL accredited laboratory in discipline of Electrical (T-1811), Electronics (T-3509) and photometry (T-3510), serving its satisfied customers for last 5 years. Laboratory is fully equipped with the highly accurate Machines to test LM 79. It owns a Integrating sphere as well as the Goniophotometer. Qualified and experienced engineer are appointed to perform the desired tests.
Gone are those days when we use incandescence (tungsten filament) or fluorescent (mercury atoms) bulb. They are replaced by LED’s Now; this is an era of SSL (LED) as ……There is innumerable reason for the rise in LED’s which cannot be counted on finger tips. It is beneficial to both USERS as well as to the nation. Its superior features make it so promising that one cannot deny using LED’s. The features of LED’s are, its low power consumption, digitally controllable, Low maintenance, Ultra long source life, no UV or IR radiations, No mercury content. SSL uses semiconductors material to convert Electricity into light. LED’s are non carbon materials.
Efficacy is the quality parameter for LED: it is measure in Lumen per watt. Higher efficacy means high energy efficient. Another quality factor is lifetime and last but not the least is Color rendering Index (CRI). CRI measures the ability of light source to reproduce the color of various objects in comparison with natural light source.
How LM-79 testing can help assess LED luminaries quality and performance?
AS LM79 report provides you with the Photometric as well as electrical parameters with a spectrum Test report. The photometric parameters are luminous flux, Efficacy and Radiant Power, CIE colorimetric Parameters (coordinates Color rendering Index (CRI), color coordinate Temperature (CCT) Duv Value, and light Intensity Distribution .Current, Voltage, Power factor, Power and frequency are the electrical parameters. It Focus on the efficiency and CRI, which are the quality parameter. Efficiency measures how much electrical energy is converting into light energy. Power factor is another electrical metric for LED driver performance and often a key parameter for street lighting due to the large number of these luminaries connected to the power grid. As far as for lifetime, LM 80 covers that part.
What is the LM-79 test methodology?
LM 79 is approved method to test Photometric and electrical measurements of Solid state lightning. It describes the procedure and precaution to be observed during measurements. This approved method covers LED based SSL products with control electronics and heat sinks incorporated, that is , those devices that require only AC main power or a DC voltage power supply to operate. This document does not covers SSL products that require external operating circuits, or external heat sink. LM 79 covers SSL product in a form of luminaries (fixture incorporating light source) as well as integrated LED lamps.
Why do we need it?
We need it to access the quality and other parameters due to increasing competition in the market. It provides the efficiency and power factor.
How is LM-79 different from other test methods used for conventional lighting products?
This approved method is a guide developed for the measurements of SSL products. While many other standards for photometric measurements of light sources and luminaries are available, these standards are separated for measurements of lamps and luminaries. Since the current SSL products are in the form of luminaries or lamps, and LED light source in luminaries are not easily separated as replaceable lamps, these existing standard cannot be applied directly to SSL products. This necessitates the use of absolute photometry. This test method uses absolute photometry where as other standard uses relative photometry in short.
Now lets us clear about relative and absolute photometry.
| S.NO | Absolute Photometry | Relative Photometry |
| 1 | Total lumen output of a luminary (bulb with fixture) | Total Lumen output of a bare lamp is measured. |
| 2 | Method used to measure LED performance. | Method used to measure Bare bulb and system performance. |
| 3 | Output is relative to an easy measured condition. | Output is measured in calibrated units under specific operating and environment conditions, ambient temperature, input voltage and orientation. |
| 4 | Specific lamp performance does not matter, | Lamps and system performance matters. |
| 5 | Use for SSL products | For NON SSL products |
What are the LM-79 test outcomes?
The outcome of the LM 79 is the REPORT providing all the required parameters as per LM 79.
They are ……
- CIE colorimetric parameters
- Chromaticity coordinate (x)
- Chromaticity coordinate (y)
- Chromaticity coordinate (u’)
- Chromaticity coordinate (v)
- Chromaticity coordinate (v’)
- Correlated color temperature(Tc)
- Duv Value
- Color Rendering Index(Ra)
- Photometric Parameters
- Luminous Flux( Lumen)
- Luminous Efficacy( Lm/W)
- Radiant Power
- Electric Parameters
- Input Voltage(V)
- Current(A)
- Power(W)
- Power Factor
- Frequency(Hz)
- Test information
Ambient Temperature, Stabilization Time, Total Operating Time, Sphere Dia, Photometric method or instrument used Wavelength range in nm of spectroradiometer.
Along with this a SPECTRUM TEST REPORT is also issued.
What are the limitations of LM-79?
- Chips, Packages, or Modules requiring external heat sinks or operating circuits are not covered
- Does not state the sampling size.
Is there a future scope for improvement in the LM-79 test?
Yes of course, there is always a scope for improvement in all areas.
Range/criteria of acceptance of CCT, CRI & Lumens may be defining to establish a harmonization of parameters globally.
Top Searches related to LM 79 Tests for LED Tube Lights:
If you’re Buyers Demanding for LM-79 Testing– Contact Now!
ITC India has around 5000 clients from LED lighting division from All over India.
Get LM 79 Test Report, You can Please feel free to Ask for Quotation.
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
Submit your requirement for Testing:-E-mail:
Describe Your Requirements with Technical Details:
Wednesday, 3 August 2016
LM 79 Testing in Kolkata West Bengal India, LM 79 Tests for LED TubeLights
LM 79 Testing for LED Tube Lights, LM 79 Testing in Kolkata West Bengal India
If you are looking for NABL Approved LM-79 Testing Laboratory in Kolkata, ITC India Can Help you! ITC India offering LM 79 Testing services for your LED Tube Light products in Kolkata West Bengal India
ITC India NABL Accredited Electrical Safety Testing Laboratory provide LM-79 Testing for LED Tube Lights includes accreditation for Solid State Lighting Luminaires, Total Flux Measurements (Luminous Efficacy) & Solid State Lighting Luminaires, Luminous Intensity Measurements.
ITC India have marketing offices in Kolkata, Mumbai, Ahmedabad, Chennai, New Delhi, Chandigarh, Panchkula, Mohali, Bangalore, Hyderabad, Pune, Surat, Visakhapatnam, Indore, Bhubaneshwar, Coimbatore, Nagpur, Kochi, Mangalore, Vadodara, Jaipur, Kozhikode (Calicut), Noida, Gurgaon, Navi Mumbai, Lucknow, Patna
The Testing to be conducted is as follows:-
| S.NO. | PRODUCT | Testing as per standard |
1. | LED Tube Light | Test to be conducted under LM 79: a. Measurement of Total Luminous Flux & Luminous Efficacy b. Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature & Color Rendering Index) c. Light Intensity Distribution Test |
Top Searches related to LM 79 Tests for LED Tube Lights:
If you’re Buyers Demanding for LM-79 Testing– Contact Now!
ITC India has around 5000 clients from LED lighting division from All over India.
Get LM 79 Test Report, You can Please feel free to Ask for Quotation.
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
Submit your requirement for Testing:-Full Name
E-mail:
Describe Your Requirements with Technical Details:
Tuesday, 26 July 2016
LM-79 Testing for LED Batten | LM-79 Test Reports | lm 79 testing labs
LM-79 Testing for LED Batten, LM-79 Test Reports, lm 79 testing labs in India
If you Require Testing of LED Batten as per LM-79. ITC India Can Help You! ITC India One of the Best LM-79 testing Laboratory in India. If you have any requirement related LED Batten Testing, you can feel free to contact us. (Call: +91-8196980555)
ITC India NABL Accredited Electrical Safety Testing Laboratory organizing LM 79 testing Testing for LED Batten lights, in all over India. If you are looking for NABL Approved LM-79 Testing Laboratory in your Area, ITC India Can do LM-79 Test for LED Batten lights in a Week.
ITC India NABL Approved Electrical Safety Testing laboratory under ELECTRICAL, ELECTRONICS and PHOTOMETRY testing with certificate no. T-3509, T-3570 & T-1811. ITC India Laboratory is fully equipped with high accuracy Measuring Instruments and trained personnel to provide testing and certification Services for Electrical and Electronic equipments. ITC Lab is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025.
The Testing to be conducted is as follows:-
| S.NO. | PRODUCT | Testing as per standard |
| 1 | LED Batten | Test to be conducted under LM 79: a. Measurement of Total Luminous Flux & Luminous Efficacy b. Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature & Color Rendering Index) |
Photometric and Electric Testing as per IES LM-79:
IES LM-79 Testing Approved Method:- Electrical and Photometric Measurements of Solid-State Lighting Products includes three sections:
- Section 9: Total Flux Measurements
- Section 10: Luminous Intensity Measurements
- Section 12: Color Characteristics Measurements. Manufacturers must also submit the IES file containing Section 10 measurements to verify compliance with the zonal lumen density or spacing criteria requirements.
Get Instant Quote, Please send us the following details:
- Product Technical Specifications and Brochure
- Product Images
- Total Number of samples Required: 2
Popular Search about LM-79 Testing:-
- How to do LM-79 Testing?
- LM-79 Testing | LM-79 Test Approved Methods
- LM-79 Testing Report for LED lights, LM-79 Test Requirements & Procedure, lm 79 certificate
- LM-79 Testing for LED DownLight | LED Down Light Testing | LM 79 testing labs in India
- LED Luminaires Testing Services
- LM 79 testing for LED product
- LM-79 Testing Service in India
If you’re Buyers Demanding for LM-79 Testing– Contact Now!
ITC India has around 5000 clients from LED lighting division from All over India.
If you are interested to Get LM 79 Test Report, You can Please feel free to Ask for Quotation.
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
Subscribe to:
Posts (Atom)