Are You Looking for BIS Approved Labs for LED Testing?

BIS Approved Labs for LED Testing

Are You Looking for BIS Approved Labs for LED Testing?

We are providing LED Lights Testing and Certification as Per BIS Standards in  Mohali, Chandigarh, Mumbai, Chennai, Ahmedabad, New Delhi, Ahmedabad, Pune, Kolkata, Bangalore, India

Are You Looking for led lighting standards testing and certification in India?

If you are looking for LED Testing according to BIS Standards in India, We Can Help You! We are one of the best BIS LED Lights Testing Service Provider in India. We Can do LED Testing as per IEC, EN, ISO, BIS Standard

On this blog, I am not just going to pitch you to hire us for our BIS LED Lighting Testing services but also going to provide a lot of valuable information on what, why, and how we can do LED Testing as per IEC, EN, ISO, BIS Standard. Call on 08196980555 for LED Testing laboratories.

is bis certification mandatory for led lights? Yes, the Bureau of Indian Standards is mandatory For LED Lighting Testing if you are looking for bis-approved led lights testing Labs in India then We are One of The Best BIS Approved laboratories, We can do led lighting standards testing and certification at a reasonable cost.

We promise to deliver perfection with every product by its evaluation and assessment techniques designed with a higher degree of professional competence. Along with its existing abilities and a strong quality system, its certifications from the BIS ensure that standardized products have gone under surveillance carried out by qualified professionals only.

BIS (Bureau of Indian Standards ) is a statutory institution established under the (BIS) Bureau of Indian Standards Act, 1986 to promote the harmonious development of the activities of standardization, marking and quality Testing and certification of goods and attending to connected matters in the country.

Our products have been placed under special Testing and certification schemes check below:

LED testing As per IS 15885 (PART-2/SEC-13):2012

This standard ensures the Safety of Lamp Control gear for LED Modules. The control gear specified in this standard is designed to provide constant voltage or current at Safety Extra Low Voltage or (HV) higher voltages. Deviations from the pure voltage and current types do not exclude the gear from this standard.

This includes insulation resistance, electric strength, creepage distances, and clearance between primary and secondary circuits, along with:

• SELV Safety Extra Low Voltage control gears
• Auto wound control gear
• Protection against electric shock
• Isolating control gears
• Separating control gears

LED testing As per IS 10322 (PART 5/SEC-1): 2012

This Indian Standard was adopted by the BIS after the draft finalized by the Illumination Engineering and Luminaires Sectional Committee had been approved by the Electrotechnical Division Council. This standard covers the safety and photometric requirements. This series consists of photometric requirements that have been incorporated, that specify requirements for fixed general purpose luminaires for use with a tungsten filament, tubular fluorescent, LED Lights, LED modules, and other discharge lamps.

LED testing As per IS 16102 (PART-1):2012

IS 16102 Testing and certification specifies the safety and interchangeability needs, together with the test methods and conditions, required to show compliance of LED Products, LED lamps with integrated means for stable operation, intended for domestic and similar general lighting purposes. This standard ensures that the products cause no danger to the user or surroundings.

We Can Do LED testing as per INDIAN STANDARDS, Hare you can see a list of the Following Indian LED Testing Standards:

• 16101: 2012 General Lighting - LEDs and LED modules – Terms and Definitions
• 16102(Part 1): 2012 Self- Ballasted LED Lamps for General Lighting ServicesPart 1 Safety Requirements
• 16102(Part 2): 2012 Self-Ballasted LED Lamps for General Lighting ServicesPart 2 Performance Requirements
• 16103(Part 1): 2012 Led Modules for General LightingPart 1Safety Requirements
• 16103(Part 2): 2012 Led Modules for General LightingPart 2 Performance Requirements
• 15885(Part2/Sec13): 2012 Safety of Lamp Control Gear Part 2 Particular Requirements Section 13 d.c. or a.c. Supplied Electronic Controlgear for Led Modules
• 16104 : 2012 c. or a.c. Supplied Electronic Control Gear for LEDModules - Performance Requirements
• 16105: 2012 Method of Measurement of Lumen Maintenance of solid State Light (LED) Sources
• 16106: 2012 Method of Electrical and Photometric Measurements of Solid-State Lighting (LED) Products
• 16107Part 1):2012 Luminaires PerformancePart 1 General Requirements
• 16107-1:2012 Luminaires Performance Part 2 Particular RequirementsSection 1 LED Luminaire
• 16108: 2012 Photobiological Safety of Lamps and Lamp Systems

Testing Advantage From us as per BIS STANDARDS :

Achieve worldwide support: by leveraging We have all over the world reach and expertise in regulations and requirements, regardless of where your lighting products are manufactured or sold.

Save time and money: by identifying compliance considerations at the earliest possible stages of the product development process.

Minimize risks:  by testing your lighting products to ensure that they meet all legal requirements for your target markets.

Gain a competitive edge: by delivering lighting products of consistent quality and safety, without compromising time to market.

Benefit from complete solutions: by utilizing our full range of testing, certification, and auditing services.

Why Choose Us For BIS Testing?

We are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single-source solution for meeting all applicable requirements, standards, and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up-to-date knowledge of current and changing requirements.

Represented in over 5 locations in India, We have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for LED Testing as Per BIS – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

1. Product Name, Technical Specifications, and Brochure
2. Product Images
3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. Our team looking forward to working with you and get better together!

Mr Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form:

Motor Efficiency Testing Labs In India

Motor Efficiency Testing Labs In India

Are You Looking for Motor Efficiency Testing according to IEC 60034-2-1 / IS 15999 (Part 2/Sec 1)?

If you are looking for Motor Efficiency Testing according to IEC 60034-2-1 Laboratory in India, we Can Help You! we are one of the best Motor Efficiency Testing Service Provider in India. We Can do Motor Efficiency Testing as per  IEC 60034-2-1 / IS 15999 (Part 2/Sec 1) Standard

Motor Efficiency Testing as per IEC 60034-2-1 / IS 15999 (Part 2/Sec 1) Standard

On this blog, I am not just going to pitch you to hire us for our Motor Efficiency Testing services but also going to provide a lot of valuable information on what, why, and how we can do Motor Efficiency Testing as per IEC 60034-2-1 / IS 15999 (Part 2/Sec 1) Standard. Call on  08196980555 for Surge Testing laboratories.

Efficiency test method  IEC 60034-2-1 / IS 15999 (Part 2/Sec 1)

Applicable to:

Rotating Electric Machine: IEC 60034 is introducing to establish methods of determining efficiencies from tests and also to specify methods of obtaining specific losses.

1. C.  Machine
2. C. Synchronous
3. Induction Machine (All Size in scope IEC 60034)
4. Rotary Converters
5. AC Commutator Motors
6. Single Phase Induction Motor

Why high efficient Motors?

• Save energy
• Reduce operation cost
• Reduce harmful greenhouse gases

Order of tests   IEC 60034-2-1

Step No.	Description
1	First stator winding resistance measurement at ambient temperature
2	Remove accessible drive end sealing elements (without dismantling the motor)
3	Clause 6.4.4.1  Rated load temperature test
4	Second stator winding resistance measurement (immediately after 6.4.4.1)
5	Clause 6.4.4.2 and 6.4.5.3  Load curve test with torque measurement (immediately after 6.4.4.1)
6	Third stator winding resistance measurement (immediately after 6.4.4.2 and 6.4.5.3)
7	Clause 6.4.2  No-load test (immediately after third stator winding resistance measurement)
8	Fourth stator winding resistance measurement (immediately after 6.4.2)
Determination of loss components must be performed in the following order
9	Clause 8.2.2.3 Constant losses (8.2.2.3.1, 8.2.2.3.2 and 8.2.2.3.3) Constant losses to Clause 8.2.2.3.1 (Friction and windage losses: 8.2.2.3.2) (Iron losses: 8.2.2.3.3)
10	Clause 8.2.2.4 Load losses (8.2.2.4.1.2 and 8.2.2.4.1.3) Load losses to Clause 8.2.2.4.1: (Stator and rotor winding losses s, including temp. correction) (8.2.2.4.1.2 and 8.2.2.4.1.3)
11	Clause 8.2.2.5 Additional load losses (8.2.2.5.1 From a load test with torque measurement) Additional load losses to Clause 8.2.2.5.1 (Residual losses)
12	Clause 8.2.2.2  Calculate total losses
13	Clause 8.2.2.1 Calculate the efficiency

Request for Motor Efficiency Testing Report as per IEC IEC 60034-2-1 / IS 15999 (Part 2/Sec 1) 

Why choose us For Motor Efficiency Testing according to IEC 60601-1? 

we are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single-source solution for meeting all applicable requirements, standards, and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up-to-date knowledge of current and changing requirements.

Represented in over 5 locations in India, We have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for Motor Efficiency Testing – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

1. Product Name, Technical Specifications, and Brochure
2. Product Images
3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. Our team looking forward to working with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form:

ISO 7175 Testing Labs | ISO 7175 Testing Laboratories

ISO 7175 Testing Labs | ISO 7175 Testing Laboratories

Are You Looking for ISO 7175 Testing?

If you are looking for an ISO 7175 Testing Laboratory in India, We Can Help You! We are one of the best ISO 7175 Testing Service Providers in India. We Can do ISO 7175 Testing

On this blog, I am not just going to pitch you to hire us for our ISO 7175 Testing services but also going to provide a lot of valuable information on what, why, and how we can do ISO 7175 Testing. Call on 08196980555 for ISO 7175 Testing laboratories.

Request for Impact Testing Report as per ISO 7175

ISO 7175 Testing[/caption]

Part 1 - Safety requirements of Children Cots and folding cots for domestic use 

Part 2: Test Methods of Children Cots and Folding cots for Domestic Use 

Internal Length between 900mm to 1400 mm

This standard applies to cots that are Fully assembled and are ready to use. It is possible that additional requirements be applied for cots that can be converted into other items (e.g. changing units, playpens).

This standard does not apply to carry cots, cribs, cradles, rocking and swinging cots

Clause 4 of ISO 7175 part 1 specifies the SAFETY REQUIREMENT apply both before and after testing as per ISO 7175 part 2

Safety Requirement as per ISO 7175 -1

S.N	Clause	Test	Requirement
1	4.2.1	Material and surface	Must meet the requirement of ISO 8124-3
2	4.2.2	Flammability of textile coated textile and plastic coverings	The maximum rate of flame shall be 30 m/s in accordance with ISO 8124-2
3	4.3	Initial stability	The cot should not overturn in accordance with ISO 7175-2 (Cl 6.2 )
4	4.4.1.1	Edges and protruding parts	Edges shall be round and free of burrs and sharp edges
5	4.4.1.2	Self-tapping screw	This screw shall not be used to fasten components when dismantling the cot for transportation.
6	4.4.1.3	Labels and decals	Should not be used on the internal surface of cot sides and ends
7	4.4.1.4	Small parts	In accordance with ISO 7175-2
8	4.4.1.5	Castor and Wheels	Should not be fitted exception are there
9	4.4.2.2	Assembly holes	No accessible hole between 7 mm dia and 12 mm dia unless depth is less than 10mm.
10	4.4.2.3	Distance between cot base and sides and end s	25 mm cone shall not pass between cot base and sides and between cot base and ends.
11	4.4.2.4	Opening in mesh sides and ends	7mm cone shall not pass through the mesh openings.
12	4.4.2.5	Distance between slats of cot base	60 mm cone should not pass between two adjacent slats of the cot base.
13	4.4.2.6	Opening in the mesh of cot base	85 mm cone shall not pass through a cot base made of mesh.
14	4.4.3	Head Entrapment on the exterior of the cot	In accordance with ISO 7175 - 2
15	4.4.4	Shear and squeeze points	In accordance with ISO 7175 - 2
16	4.4.5	Snag points	In accordance with ISO 7175 - 2
17	4.4.6	Locking System	All cots should be equipped with at least two locking system
18	4.4.7	Cot base	In accordance with ISO 7175 - 2
19	4.4.8	Sides and ends	In accordance with ISO 7175 - 2
20	4.4.9	Cot rim	No filing shall be removed from cot rim when testing as per 7175-2, 6.6 bite test
21	4.5	Final Stability	The cot should not overturn as per cl 6.12 of ISO 7175-2
22	4.6	Mattress size	The distance between mattress and sides shall be less than 30mm
23	5	Packaging	The plastic covering should be tested as per ISO 8124-1
24	6	Instruction for use	Read carefully and alphabet size >5mm

Part 2 Test Method: Children’s cot and folding cots for domestic use

This standard is designed to prevent the child from climbing out. Does not apply to swing and rocking chair.

Test equipment

Test forces must be applied with a suitable object like cones, cones of dia 7mm, 25mm, 45mm, 60mm, 65mm, and 85mm made of plastic or other hard materials are required for applying force.

Measurements/ Testing

1 . Before testing, Assemble and inspect the cot visually. Tight all the fittings. Determine whether exposed edges, screws, bolts, zips, and other fittings are rounded off and do not have sharp edges.

2. Measure the height of sides, holes, and distance between slats of cot base, mesh width, side slats, clearance between cot base and sides and ends.
3. Impact testing
4. Stability tests
5. Locking and location device
6. Bend testing
7. Fatigue testing
8. Endurance testing
9. Static loading testing
10. Inspection
11. Mechanical testing

 For more information please write ITCIndiaOne@gmail.com

Why Choose Us For ISO 7175 Testing?

We are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single-source solution for meeting all applicable requirements, standards, and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up-to-date knowledge of current and changing requirements.

Represented in over 5 locations in India, We Have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for ISO 7175  Testing – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

1. Product Name, Technical Specifications, and Brochure
2. Product Images
3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. Our team looking forward to working with you and get better together!

Mr Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form:

EN/ IEC 62262 Impact Testing Labs | Impact IK Test Laboratories

EN/ IEC 62262 Impact Testing Labs | Impact IK Test Laboratories

Are You Looking for Impact Testing according to EN/IEC 62262?

If you are looking for Impact Testing according to IEC 62262 Laboratory in India, We Can Help You! We are one of the best Impact Testing Service Providers in India. We Can do Impact Testing as per IEC 62262 Standard

On this blog, I am not just going to pitch you to hire us for our Impact Testing services but also going to provide a lot of valuable information on what, why, and how we can do Impact Testing as per IEC 62262 Standard. Call on  08196980555 for Impact Testing laboratories.

EN/ IEC 62262 Impact Testing

Degrees of Protection Provided by Enclosures for Electrical Equipment Against External Mechanical Impacts (IK Code)
The IEC/EN 62262 standard defines an IK code that gives the equipment capacity to resist to mechanical impacts, on all the electrical enclosure surfaces.

Product on which IK is applicable :

1. Electrical Enclosures
2. Empty Enclosures
3. CCTV Cameras
4. LED street, Roadway, and other lighting products
5. Light Fixtures and many other products

Reference standards :

1. IEC 60068-1
2. 60068-2-75

Relevant product standards

We can execute impact testing describe above to any product standard. For Example:

1. IEC/BS/EN 61429: Low voltage switch-gear and control assemblies
2. IEC/BS/EN 62271: High Voltage switch-gear and control gear.
3. IEC/BS/EN 50130-5 Alarm System (Environment Test Method)
4. IEC/ BS/EN  60598-1 Luminaries
5. IEC 62696: Luminaries (Application of IK code as per  IEC/EN 62262)
6. IEC /BS/ EN 62676-1-1 Video surveillance system for use in security applications.
7. IEC /BS/EN 62208 Empty Enclosure for Low voltage switch-gear and control-gear assemblies.

Benefits of IK testing

It caters the evidence of the suitability of the enclosure for its intended environment.

1. More durability
2. High in demand
3. Beneficial for the end-user

IK Code	Impact Energy in joules
IK 01	0.14 J
IK 02	0.2 J
IK 03	0.35 J
IK 04	0.5 J
IK 05	0.7 J
IK 06	1 J
IK 07	2 J
IK 08	5 J
IK 09	10 J
IK 10	20 J

IK Code	IK 00	IK 01 to IK 05	IK 06	IK 07	IK 08	IK 09	IK 10
Impact Energy	-	Less than 1 J	1 J	2 J	5 J	10 J	20 J
R mm (Radius striking element)	-	10	10	25	25	50	50
Material	-	Polyamide	Polyamide	Steel	Steel	Steel	Steel
Mass in Kgs	-	0.2	0.5	0.5	1.7	5	5
Pendulum Hammer	-	🗹	🗹	🗹	🗹	🗹	🗹
Spring hammer	-	🗹	🗹	🗹	🗷	🗷	🗷
Free Fall	-	🗷	🗷	🗹	🗹	🗹	🗹

Spring Hammer	Pendulum Hammer	Free Fall

Request for Impact Testing Report as per EN/IEC 62262

Why choose us For Impact Testing according to EN/IEC 62262?

We are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single-source solution for meeting all applicable requirements, standards, and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up-to-date knowledge of current and changing requirements.

Represented in over 5 locations in India, We have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for Impact IK Testing – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

1. Product Name, Technical Specifications, and Brochure
2. Product Images
3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward to working with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form:

Exit Sign Testing Labs In India

Are You Looking for Exit Sign Testing Labs In India?

Are You Looking for Exit Sign Testing according to IEC 60598-1?

If you are looking for an Exit Sign Testing according to IEC 60598-1 Laboratory in India, We Can Help You! We are one of the best Exit Sign Testing Service Provider in India. We Can do Exit Sign Testing as per IEC 60598-1 Standard

On this blog, I am not just going to pitch you to hire us for our Exit Sign Testing services but also going to provide a lot of valuable information on what, why, and how we can do Exit Sign Testing as per IEC 60598-1 Standard. Call on 08196980555 for Exit Sign Testing laboratories.

Exit Sign Testing as per IEC 60598-1 Standard

S.NO.	PRODUCT	Testing as per standard
1.	Exit Sign	Test as per IEC 60598-1: Protection against electric shock (Clause 8)
		Protection of the enclosure (Clause 9)
		Creepage distances and clearances (Clause 11)
		Endurance test (Clause 12.3)
		The mechanical strength of screws and nuts (Clause 14)

Request for Exit Sign Testing Report as per IEC 60598-1

Why choose us For Exit Sign Testing according to IEC 60598-1?

We are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single-source solution for meeting all applicable requirements, standards, and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up-to-date knowledge of current and changing requirements.

Represented in over 5 locations in India, We have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for Exit Sign Testing – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

1. Product Name, Technical Specifications, and Brochure
2. Product Images
3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. our team looking forward to working with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form:

Surge Testing Labs In India

Are You Looking for Surge Testing Labs In India?

Are You Looking for Surge Testing according to IEC 61000-4-5?

If you are looking for Surge Testing according to IEC 61000-4-5 Laboratory in India, We Can Help You! We are one of the best Surge Testing Service Provider in India. We Can do Surge Testing as per IEC 61000-4-5 Standard

Surge Testing as per IEC 61000-4-5 Standard

On this blog, I am not just going to pitch you to hire us for our Surge Testing services but also going to provide a lot of valuable information on what, why, and how we can do Surge Testing as per IEC 61000-4-5 Standard. Call on 08196980555 for Surge Testing laboratories.

Request for Surge Testing Report as per IEC 61000-4-5

Why choose us For Surge  Testing according to IEC 60601-1?

We are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single-source solution for meeting all applicable requirements, standards, and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up-to-date knowledge of current and changing requirements.

Represented in over 5 locations in India, We have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for Surge Testing – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

1. Product Name, Technical Specifications, and Brochure
2. Product Images
3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. our team looking forward to working with you and get better together!

Mr Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form:

ISO 9847 Calibration of Field Pyranometers

ISO 9847 Calibration of Field Pyranometers 

ISO 9847 Calibration of Field Pyranometers by Comparison to a Reference Pyranometer.

Are you looking for your pyranometer to be calibrated, ITC India Pvt Ltd has the facility to calibrate thermopile pyranometer at Lab and onsight. You are most welcome in ITC India Pvt Ltd for Pyranometer calibration. Either you can send the Pyranometer in the Lab or onsight calibration can be facilitated. Write to us at info@itcindia.org URL www.itcindi.org 

The calibration method is performed by our highly trained engineers and complies with type IIc Direct beam calibration of pyranometer as per international standard ISO 9847. 

Indoor calibration of field pyranometer is better as compared to outdoor in the following ways.

• User control of test conditions
• Results are independent of outdoor conditions
• User convenience

The precision of the outdoor determination of the calibration factor of a field pyranometer is particularly dependent on sky conditions and solar elevation when performing measurements at low angles. Repeatability within any 21 points or more set of values of the same test scan performed at or near solar noon under stable irradiance conditions should be less than ± 0.5 % of the calibrated value of the instrument. If this requirement cannot be met, indoor calibration should be considered

To maintain performance, recalibration is usually recommended every two years, and a high-quality water-proof connector for the signal cable greatly simplifies the process.

IP Ingress Protection Testing Labs | IP Testing Laboratories - ITCIndia

How To Get IP66 Testing And Certification In India?

How To Get IP66 Testing And Certification In India?

IP66 Ingress Protection Testing And Certification

Are you looking for IP66 Testing and Certification Laboratory in India, If yes then you are at the right website We are One of the Best IP66 Testing and Certification Lab in India, Let's introduced with the place which is Best for IP66 Testing And Certification Labs where you can have the best result for IP66 Testing. Call on 08196980555 for IP66 Testing laboratories.

IP66 Testing Labs offers a full range of IP66 Testing services. We have fully equipped to test and approve a wide range of electrical products and equipment for organizational and governmental certifications, from battery chargers and lighting equipment to medical electrical equipment and wireless devices.

IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water.

IP66 Defining Characteristics:

• Complete protection from dust, oil, and other non-corrosive material
• Complete protection from contact with the enclosed equipment
• Protection from water, even from powerful jets of water
• Equivalent to NEMA rated 4 and 4X enclosures
• Engraving, silk-screening, and anodizing services available
• Custom with cutouts, insulation, hinges, latches, or locks

IP66 Protection Standards

http://www.youtube.com/watch?v=UqqBvBSZMnQ

Refer to the chart below for the ratings of relative protection of electrical enclosures:

IP Rating	Protection	Description	Test Method
IP66 Enclosures	Able to protect against powerful water jets	Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects.	Test duration: at least 3 minutes
			Water volume: 100 liters per minute
			Pressure: 100 kPa at a distance of 3 m

IP66 Protected from total dust ingress. Protected from high-pressure water jets from any direction. IP66 Rating / IP66 Certification: The first digit (6) & the second digit (6) both are described above
For enclosures, the typical waterproof IP ratings are IP66 enclosures. The chart below gives the specifics of what these ratings mean and how they are measured.

What is the meaning of ip66?

IP65 Enclosure - IP rated as "dust tight" and protected against water projected from a nozzle. IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water. IP 67 Enclosures - IP rated as "dust tight" and protected against immersion. learn more

What does ip66 waterproof mean?

If you want to light your outdoor area, one solution that may cross your mind is the installation of a light-emitting diode (lighting) lamp. ... Such lights normally have IP65 or IP66 ratings. However, the latter has a more robust waterproof capability, but it is paramount to know what “IP66” means.  Learn More

IP66 WATER

1. Protected against vertically falling drops of water. Limited ingress permitted.
2. Protected against vertically falling drops of water with enclosure tilted up to 15 degrees from the vertical. Limited ingress permitted.
3 Protected against sprays of water up to 60 degrees from the vertical. Limited ingress permitted for three minutes.
4. Protected against water splashed in all directions. Limited ingress permitted.
5. Protected against jets of water. Limited ingress permitted.
6. Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities.
7. Protection against the effects of immersion in water between 15 cm and 1 m for 30 minutes.
8. Protection against the effects of immersion in water under pressure for long periods.

IP66 SOLIDS

1. Protected against a solid object greater than 50 mm 4pr A-.1 such as a hand.
2. Protected against a solid object greater than 12.5 mm such as a finger.
3. Protected against a solid object greater than 2.5 mm such as a screwdriver.
4. Protected against a solid object greater than 1 mm such as a wire.
5. Dust Protected. Limited ingress of dust permitted. Will not interfere with the operation of the equipment. Two to eight hours.
6. Dust-tight. No Ingress of dust. Two to eight hours.

Why Choose Us For IP65 Testing?

We are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single-source solution for meeting all applicable requirements, standards, and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up-to-date knowledge of current and changing requirements.

Represented in over 5 locations in India, We have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for  IP Testing – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

1. Product Name, Technical Specifications, and Brochure
2. Product Images
3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. Our team looking forward to working with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form:

How To Get IP65 Testing And Certification In India?

How To Get IP65 Testing And Certification In India?

Are you looking for IP65 Testing and Certification Laboratory in India, If yes then you are at the right website We are One of the Best IP65 Testing and Certification Lab in India, Let's introduced with the place which is best for IP65 Testing And Certification Labs where you can have the best result for IP65 Testing. Call on 08196980555 for IP65 Testing laboratories.

IP65 Testing Labs offers a full range of IP65 Testing services. We have fully equipped to test and approve a wide range of electrical products and equipment for organizational and governmental certifications, from battery chargers and lighting equipment to medical electrical equipment and wireless devices.

IP65 Testing And certification

IP65 Rating / IP65 Certification: The first digit 6 shows complete protection against contact with live or moving parts inside the enclosure and against the ingress of dust. Meaning of second digit 5 already described above.
IP Enclosure Ratings and Standards Explained

The IP rating is also known as Ingress Protection or International Protection ratings which are defined to the international standard of EN 60529, BS EN 60529:1992, IEC 60509:1989. These standards are used to define the levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies such as dirt and water.

The rating consists of the letters IP followed by 2 digits, the first digit stands for the level of protection that the enclosure provides against solid bodies, the second digit describes the degree of protection of the equipment inside the enclosure against water.

IP65 = First Digit - Solids
IP65 = Second Digit - Liquids

Below is easy to follow chart to help you decide which IP rating / IP Codes you may require for your electrical enclosure, Rainford manufacturers IP rated electrical enclosures including IP54, IP65 up to IP

What is an ip65 enclosure?

IP65 Enclosure - IP rated as "dust tight" and protected against water projected from a nozzle. IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water. IP 67 Enclosures - IP rated as "dust tight" and protected against immersion. Learn More

Is ip65 waterproof?

Example: With an IP65 rating, the LEDs can be used in an outside setting and are water-resistant but they are not waterproof and are not suitable to be submerged. An IP68 can be submerged in water. Learn more

What are ip65 standards?

we utilize the IEC's standardized International Protection Code system for measuring enclosures' capabilities. The IP Code reflects the degree of protection as "IP" followed by two numbers; the first digit shows the extent to which enclosures are protected against particles and protection to others from enclosed hazards. The second digit indicates the extent of protection against water. We carry IP65 enclosures which offer complete protection against particles, and a good level of protection against water. Because all of our enclosures strictly observe the standards, you can expect first-rate and competitively-priced enclosures.

IP65 Enclosures' Characteristics:

• Complete protection from dust, oil, and other non-corrosive material
• Complete protection from contact with the enclosed equipment
• Protection from water, up to water projected by a nozzle against enclosure from any direction
• Silk-screening, anodizing, or engraving services available
• Custom with cutouts, insulation, hinges, latches, or locks

IP 65 Standards for Electrical Enclosure Protection
Refer to the chart below for the ratings of relative protection of electrical enclosures: Learn More 

Is ip65 suitable for outdoor use?

Waterproof Wall Lights for Outdoor Lighting. There is a wide range of wall lights, but not all can be used outdoors; it is recommended to install a wall fitting that is at least IP44 rated so that water would not reach the electricals, or even an IP65 or IP67 waterproof fitting (to be more secure) Learn More

IP Testing Procedure

IP Testing (IEC 60529): IEC 60529 is an international standard designed to give products a determined International Protection Marking according to the IP Code rating. This standard tests the sealing effectiveness of enclosures of electrical equipment against the intrusion of solid particles and liquid. Learn more

Water Resistant and Waterproofing Testing And Certification as Per IP65

We offer waterproof testing along with hundreds of other environmental testing services. Our lab experts are experienced in many industry standards including ISO 20653 and EN/IEC 60529 which outline the procedures and ratings for ingress protection testing. We assist many manufacturers and product developers in qualifying and certifying component durability.

We Can do IP65 Testing And Certification on Common Products That Are Waterproof

• LED Lights
• Watches
• Laptops
• Phones
• Tablets
• Automotive Components
• Scuba Gear
• Gauges
• Cameras
• Radios
• Speakers
• Boots
• Laugage
• Gloves
• Electronic Components
• Military Components

Why choose Us For IP65 Testing?

We are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single-source solution for meeting all applicable requirements, standards, and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up-to-date knowledge of current and changing requirements.

Represented in over 5 locations in India, We have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for  IP65 Testing – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

1. Product Name, Technical Specifications, and Brochure
2. Product Images
3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. Our team looking forward to working with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form:

EN-IEC 60601 Testing Laboratories in India

EN/IEC 60601 Testing Laboratories in India

let Introduced with the place which is best for IEC 60601 Testing Labs where you can have the best result for 60601 Testing. Call on 08196980555 for 60601 Testing laboratories

We are one of the Best  60601 Testing laboratories for medical devices to verify compliance with major standards and international regulations.

EN/IEC 60601 Testing Labs offers a full range of EN/IEC 60601 Testing services. We have fully equipped to test and approve a wide range of electrical products and equipment for organizational and governmental certifications, from battery chargers and lighting equipment to medical electrical equipment and wireless devices.

The medical industry is rapidly adopting new technology that enables better communication and performance of Equipment and systems to improve the safety of care. Manufacturers today, face a number of compliance challenges, as devices that do not meet the highest quality and safety standards present, a risk of injury, recalls, bans and liability.

Electronic devices used in medical environments have important safety and performance requirements to ensure safety and compatibility with other critical care product.

Complying with EN/IEC 60601-1 Standard

EN/IEC 60601-1 applies to all Medical Electrical products and Medical Electrical Systems. The medical Electrical product is defined in the standard as electrical equipment having an applied part or transferring energy to or from the patient or detecting such energy transfer to or from the patient and which is:

1. Provided with not more than one connection to a particular supply main and
2. Intended by its manufacturer to be used in the diagnosis, treatment, or monitoring of a patient; or for compensation or alleviation of disease, injury or disability.
3. This includes a wide range of medical devices, for example:
4. High-Frequency Surgical Equipment
5. Cardiac Defibrillators
6. Patient Monitors
7. Therapeutic and Diagnostic Ultrasound Equipment
8. Medical Lasers
9. Patient Ventilators
10. Infant Incubators and Warmers

EN/IEC 60601-1 for Medical Electrical Equipment Safety Testing

EN/IEC 60601-1 is the harmonized standard for medical electrical equipment recognized by public health authorities in most countries. In addition to basic safety requirements, the third edition with amendment 1 includes requirements for essential performance, software, usability, lasers and EMC that can be delivered locally via our own test labs where customers can witness their tests.

Our services for EN/IEC 60601 based standards

1. The option of using the question-based approach or an on-site audit-based approach to demonstrate conformity to EN/IEC 60601-1:2005
2. Public and private training to IEC 60601 2nd and 3rd editions, differences, ISO 14971, Amendment 1, and more
3. Gap assessment to EN/IEC 60601 and ISO 14971
4. IEC 60601 Proactive Review – Early engagement for both 2nd and 3rd edition to support demanding project completion schedules.
5. Options for evaluations to EN/IEC 60601 2nd and 3rd editions
6. Potential for reduced FUS inspections and integrated quality system ISO 13485 and/or ISO 14971 assessments
7. CB Scheme test reports and test certificates
8. Software assessments to support EN/IEC 60601 Clause 14 and, if requested, EN/IEC 62304
9. Usability assessments to support Collateral standard EN/IEC 60601-1-6 and, if requested, EN/IEC 62366
10. EMC testing and assessments to support EN/IEC 60601-1-2
11. Home Healthcare assessments to support EN/IEC 60601-1-11

Top 15 Easy Way To Get test Report as per EN/IEC 60601

1. Prepare A Project Plan
2. Determine Which Standards Apply To Your Device
3. Classify Your Product
4. Create An Isolation Diagram Early In The Development Lifecycle
5. Identify Critical Components And Obtain Manufacturer Specification Sheets
6. Identify Essential Performance And Prepare A Draft Rmf
7. Draft Your Test Plan
8. Review Marking And Labeling Requirements
9. Construction Review
10. What To Consider With Test Labs
11. Request Quotes
12. Finalize Rmf And Essential Performance
13. Pre-test Your Device(S)
14. Determine What You Need For Testing And Critical Timelines
15. Communication With Test Labs And End Results

Top 7 Benefits of EN/IEC 60601 Testing :

With EN/IEC 60601-1 compliance testing from us, you can be sure of:

1. A worldwide benchmark for electrical medical equipment
2. Conformity to approved standards worldwide
3. Position your products competitively worldwide with an independent third-party test mark
4. Reduced risk of company liability with documented safety standards
5. Fast audit times and long-standing experience from a company with a global presence
6. Our exclusive, one-stop service
7. Compliance with local government and legal requirements

Our Advantages of using EN/IEC 60601 Testing Labs

• 24-hour start for critical projects
• Real-time online project tracking
• Extensive knowledge of FDA requirements and procedures
• Less than one hour drive from FDA headquarters, for conducting face-to-face meetings and helping to expedite a clearance

People also ask

• What is the IEC 60601 1 standard?
• What is 60601?
• What is medical electrical equipment?
• What is an essential performance?

Our thorough knowledge of industry performance and national safety standards, combined with extensive global testing resources, allows you to get your equipment on the market in a timely and cost-effective way.

Why Choose Us For LED Testing?

We are a leading provider of comprehensive testing services for Medical products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single-source solution for meeting all applicable requirements, standards, and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up-to-date knowledge of current and changing requirements.

Represented in over 5 locations in India, We have an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

We can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for  60601 Testing – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

1. Product Name, Technical Specifications, and Brochure
2. Product Images
3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. Our team looking forward to working with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

LED Testing Laboratories – LED Testing Lab Near Me

LED Testing Labs | LED Testing Laboratories – LED Testing Lab Near Me

LED Testing Lab, LED Testing, LED Testing laboratories, LED Testing Labs, LED Test Lab

ITC India is having best LED Testing Labs to test LED. We provide all types of testing related to LED Lights. Call at 08196980555 for LED Testing Laboratories.

ITC India test Laboratories provides LED Testing Lab to help customer product development. ITC India has fully equipped LED Testing Lab where we allow customers to characterize LEDs, light engines, and SSL lamps, luminaries and modules etc. We are offering one-stop shopping quality to each customer through our expertise, and state of the art product testing facilities.

Supporting your testing and certification requirements for LED lighting

Significant improvements in the quality and performance of light emitting diodes LED lighting has made it the preferred technology for lamps and lighting products used in consumer, commercial and industrial applications. LED lighting is more energy efficient, and the rapidly growing use of LED lighting will help to reduce energy demand in the coming years. However, LED technology continues to evolve to meet the performance requirements of more demanding applications. As a result, LED testing requirements are changing and expanding to address these issues.

We support the LED industry in the following area:

• General Testing of LED Arrays, Lamps, Luminaires, Lighting Systems LED Modules and so on
• General Testing of Lighting parts and components
• Product Improvement and Engineering Excellence Solutions
• Quality Assurance and Sourcing Excellence Solutions

What is LED Testing?

Like other lighting products, LED lighting is typically subject to electrical safety, electromagnetic compatibility, and energy efficiency testing. In addition, product performance issues related to the color and intensity of emitted light or exposure to extreme environmental conditions are important considerations for LED lighting products used in demanding applications such as transportation and infrastructure projects. Concerns about the possible health effects from exposure to light generated from LED lighting has also resulted in the introduction of photobiological testing of LED lighting to ensure user safety.

ITC India supports companies from basic research like LED lighting module performance by fully accredited testing in conjunction and pre-compliance testing with our certification partners like EUROTECH, EUROCERT, EUROINSPECTIONS and NABCBL to international standards and performance schemes such as Lighting Facts, DLC , CEC, Eco Design,  Lighting Facts, Energy Labeling and safety schemes like ENEC, CE, GS and UL/ETL Marks. If you are looking LED testing lab then choose ITC India LED Testing Laboratories which is India’s trusted Laboratories.

Searches related to LED Testing Labs

led testing labs in India

ITC India test laboratories

lm 79 testing labs in india

Why LED testing is Important?

LED lighting performance is a primary concern for commercial and industrial customers, and certification to specific performance standards can be used as evidence of compliance with buyer requirements. In addition, demonstrated compliance with the requirements of voluntary energy efficiency schemes, such as the U.S. ENERGY STAR program, can be important factors for marketplace acceptance. Finally, certain tests such as those addressing electrical and photometric safety are generally required for access to major markets, including the U.S. and the EU.

ITC India Can do Photometric Performance Information as per IES Standards:

ITCIndia can provide various services to measure the photometric performance of LED packages, lamps, luminaires and other light sources and products.

ITC India NABL And BIS accredited Photometric  laboratory can do:

ITC India Can do Color Measurements as per IES Standards:

• IES LM-58:1994- Spectroradiometric Measurements
• CIE Pub. 13.3:1995- Method of Measuring and Specifying Color Rendering of Light Sources

 ITC India Can do Luminaires Testing as per IES Standards:

• IES LM-10:1996- Photometric Testing of Outdoor Fluorescent Luminaires
• IES LM-31:1995- Photometric Testing of Roadway Luminaires
• IES LM-35:2002- Photometric Testing of Floodlights Using Incandescent Filament or Discharge Lamps
• IES LM-41:1998- Photometric Testing of Indoor Fluorescent Luminaires
• IES LM-46:2004- Photometric Testing of Indoor Luminaires Using High-Intensity Discharge or Incandescent Filament Lamps

LED Lights cannot be manufactured with consistent optical properties as a result of the production processes involved. Brightness and color can vary substantially from component to component even in the same production batch. This is why LED Lights have to be tested during production and in their final application. Comprehensive optical characterization is also essential during research and development of LED Lights and for LED Lights -based products.

ITCIndia services for LED Lights include the following tests and certifications:

• IEC/EN 62471 photobiological safety of lamps and lamp systems
• IEC/EN 62031 safety requirement of LED module for general lighting
• IEC/EN 60968 safety requirement of the self-ballasted lamp for general lighting
• IEC 62560 safety requirement of LED self-ballasted lamp for general lighting which goes beyond 50V
• IEC/EN 61347-1 safety requirement and general usage of lamp control gear-part1
• IEC/EN 61347-2-13 lamp control gear-part 2-13: the special requirement of LED module that uses alternating or direct current electronic control gear
• IEC/EN 60598 the safety requirement of various light fixtures
• IEC/EN 60838-2-2 miscellaneous lamp sockets-part 2-2: the special requirements of LED module connectors

ITCIndia has developed turnkey solutions for determining luminous intensity, luminous flux, color, spectrum and spatial radiation pattern of LED Lights. The measurement systems generate very accurate results with reliable reproducibility in conformity with the guidelines of the CIE 127 document of the International Commission on Illumination. Instrument Systems uses high-performance spectroradiometers to deliver these solutions.

 ITC India Can do Photometric Measurements per IES Standards:

1. IES LM-9:1999- Fluorescent Lamps - Total Flux Measurements
2. IES LM-9:1999- Fluorescent Lamps - Intensity Measurements
3. IES LM-9:2009- Fluorescent Lamps - Total Flux Measurements
4. IES LM-9:2009- Fluorescent Lamps - Intensity Measurements
5. IES LM-45:1991- Incandescent Lamps - Intensity Measurements
6. IES LM-45:2000- Incandescent Lamps - Total Flux Measurements
7. IES LM-45:2000- Incandescent Lamps - Intensity Measurements
8. IES LM-45:2009- Incandescent Lamps - Total Flux Measurements
9. IES LM-45:2009- Incandescent Lamps - Intensity Measurements
10. IES LM-51:2000- High-Intensity Discharge Lamps -Total Flux Measurements
11. IES LM-51:2000- High-Intensity Discharge Lamps - Intensity Measurements
12. IES LM-66:2000- Single-Ended Compact Fluorescent Lamps - Total Flux Measurements
13. IES LM-66:2000- Single-Ended Compact Fluorescent Lamps - Intensity Measurements
14. IES LM-66:2011- Single-Ended Compact Fluorescent Lamps - Total Flux Measurements
15. IES LM-66:2011- Single-Ended Compact Fluorescent Lamps - Intensity Measurements
16. EN/IEC 60969, Ed. 1.2: 2001- Self-Ballasted Lamps for General Lighting Services - Performance Requirements

ITC India Can do SSL Color Measurements per IES Standards

• IES LM-58:1994- Spectroradiometric Measurements
• CIE Pub. 13.3:1995- Method of Measuring and Specifying Color Rendering of Light Sources
• IES LM-79:2008 - Solid State Lighting Luminaires - Color Characteristic Measurements
• IES LM-16:1993- Practical Guide to Colorimetry of Light Sources
• CIE Pub. 15:2004- Method of Measuring and Specifying Color Rendering of Light Sources

ITC India Can do SSL Photometric Measurements per IES Standards

• IES LM-79:2008 Solid State Lighting Luminaires - Total Flux Measurements (Luminous Efficacy)
• IES LM-79:2008 Solid State Lighting Luminaires - Luminous Intensity Measurements

ITC India Can do Electrical Performance Information per IES Standards

ITC India Can do SSL Electrical Measurements per IES Standards:

• ANSI C82.2:2002- Ballast for Fluorescent Lamps - Methods of Measurement
• ANSI C82.77:2002- Harmonic Emission Limits - Related Power Quality Requirements for Lighting Equipment

ITC India Can do Electrical Measurements per IES Standards

• IES LM-9:1999- Fluorescent Lamps - Electrical Measurements
• IES LM-9:2009- Fluorescent Lamps - Electrical Measurements
• IES LM-45:2009- Incandescent Lamps - Electrical Measurements
• IES LM-51:2000- High-Intensity Discharge (HID) Lamps - Electrical Measurements
• IES LM-66:2000- Single-Ended Compact Fluorescent Lamps - Electrical Measurements
• IES LM-66:2011- Single-Ended Compact Fluorescent Lamps - Electrical Measurements
• ANSI C78.375:1997- Fluorescent Lamps - Electrical Measurements
• ANSI C78.389:2004- High-Intensity Discharge Lamps - Methods of Measuring Characteristics
• ANSI C78.5:2003- Compact Fluorescent Lamps - Run-up and Start-up Times
• ANSI C82.2:2002- Ballast for Fluorescent Lamps - Methods of Measurement
• ANSI C82.6:2005- Ballast for High-Intensity Discharge Lamps - Methods of Measurement

ITC India Can do Life test and Reliability Information per IES Standards

ITCIndia can provide services to measure the performance of lamps, luminaires and other light fittings and products in terms of their lifetime. These include:

ITC India Can do Life Tests per IES Standards

• IES LM-40:2001- Fluorescent Lamps - Life Test Performance
• IES LM-47:2001- High-Intensity Discharge Lamps - Life Test Performance
• IES LM-49:2001- Incandescent Filament Lamps - Life Test Performance
• IES LM-65:2001- Single-Ended Compact Fluorescent Lamps - Life Test Performance
• IES LM-65:2010- Single-Ended Compact Fluorescent Lamps - Life Test Performance

NABL And BIS accredited lumen depreciation testing for LED packages, modules and light engines to standards IESNA LM-80-08 and using IESNA TM-21

Future of LED lights:

Since the development of high-brightness blue and white LED Lights, the market for LED light has been booming. LED Lights are used in displays, illuminated advertisements, and lamps. The new light of white LED Lights is already being integrated with cars, aircraft, traffic lights, and classic architectural lighting. It's no surprise that a brilliant future has been predicted for LED Lights.

Companies like Philips, Osram, Bajaj and General Electric work round the clock to improve LED light. ITCIndia is cooperating intensively with these companies on metrology. This commitment represents an investment in the future because joining forces in this way provide information on the needs of industry when it comes to measuring LED Lights. ITCIndia also makes an important contribution to the definition of international standards. And this is one of the reasons why ITCIndia is One of the best NABL Approved LED Testing lab in India.

Why choose ITCIndia For LED Testing?

ITCIndia is a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state of the art testing laboratories, assure a single source solution for meeting all applicable requirements, standards and voluntary schemes. And ITCIndia technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up to date knowledge of current and changing requirements.

Represented in over 5 locations in India, ITCIndia has an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The ITCIndia brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand.

NABL And BIS  accredited performance testing for lumen depreciation of self-ballasted LED lamps, LED lamps with external ballasts and LED luminaires.

ITCIndia can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance

If Your Buyers Demanding for Street Light Testing – Contact Now!

Kindly send us the following Details, So that we can provide you with a quotation for the same:

1. Product Name, Technical Specifications, and Brochure
2. Product Images
3. Total Number of Samples Required: 2

Wish this blog post will help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward to working with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form: